Best re-seal kit for pre-62 Sheridan Blue Streak?

[Pumper111]

Where is the best place online to get the right early Sheridan(/hold-down safety) re-seal kit? Ive been looking at Baker Airguns,, as they list a specific pre-1962 set, as Ive read not all reseal kits for B/S's will work. Along with tool( rental)
Any info?

[bantam5s]

Baker airguns will have everything you need, but while he doesn't sell the tool I do prefer the very inclusive mac1 kits.
You get the secret sauce with the kit, and he even includes stuff you didn't even think about needing.
You can get the tool from baker or Ebay and the kit from mac1, that's what I'd do.

[Pumper111]

So you like the teflon seals instead of lead?  Theres a post about dropping fps with the new teflon seals, until they break in. 

[Van]

   The Teflon valve body seals are easier to use and seal better than lead in my experience.  The Teflon intake check seal needs to be set to the valve seat by putting a wood dowel against the back of it and tapping it down on the seat as per instructions on Mac1 web site.  I forgot to tap it down on my reseal job but it set itself after a short time by leaving it pumped up overnight.  FPS was higher than expected so no problem there.  With any seal kit the FPS will usually go up some after the new pump cup and seals break in and get more efficient.  The other seal kits use a softer inlet check seal and are said to not hold up as long as the harder Teflon.

[Hddriver]

Hey I see you guys talking about mac1 one..is he a member..dead..moved on..what...I have an old 1962 blue streak..that needs to be rebuilt...disabled so I can't do this anymore..who is this guy and how do I get ahold of him...
thanks

Baker airguns will have everything you need, but while he doesn't sell the tool I do prefer the very inclusive mac1 kits.
You get the secret sauce with the kit, and he even includes stuff you didn't even think about needing.
You can get the tool from baker or Ebay and the kit from mac1, that's what I'd do.

[bantam5s]

If you Google Mac1Airguns you should get the option to call.
The website is down and he has not been able to get a new one going yet it seems.

[OTmachine]

You could give Mike Baker a call:
Crosman, Benjamin, Sheridan and the old S&W 77A,78G/79G, 80G. 2800 + line items of parts.

Mike Baker
12050 E. Ladera Ct.
Cornville, AZ. 86325
503-706-9512