1
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by Motorhead on Today at 01:39:47 AM »Can relate to that ... 1st tool I ground near 10 years ago with 5% cobalt HHS. I broke it stupidly using to put in a face o-ring groove not taking into account the radius clearance requiredBarrel bore I.D. groove tools are FUN to make ... Not !!! One shown I did last year using a Carbide tip tool. Much harder to grind shape, but end result it has been tough, tho always nervous setting it up & using 2
Pump and Compressor / Re: NEW GX-E-CS1-I« Last post by TRIGGER2 on Today at 01:36:19 AM »Thanks! Watched his channel but everything is CS2,3 ETC. Good place for lots of info though, I had forgotten about him! Sent him an email so we'll see , he may have some good suggestions for me!
Thanks for the reply! 4
Back Room / Re: What are you watching or have recently watched?« Last post by hallwoo on Today at 01:10:46 AM »the story of Atlantis
5
Support Equipment For PCP/HPA/CO2 / Re: HPA compressors« Last post by maraudinglizard on Today at 01:08:34 AM »I bought this one direct from Vevor last year as a back up, I liked it so much that the Nomad ll became the back up compressor, so far it has done well filling the big bore stuff and my small benji bottle. Can't beat the price and it got here in about 3 days. Just throwing another cookie out there.
https://www.vevor.com/pcp-air-compressor-c_10037/vevor-30mpa-high-pressure-air-pump-scuba-pcp-compressor-auto-stop-12v-110v-220v-p_010482656541 6
Crosman-Benjamin Air Gun Gate / Re: Extended Pump 1322« Last post by Van on Today at 12:56:54 AM »Ray, the short tube is a 1322 next to a 2100. I forgot to mention that. I never was a fan of the pins through a nice walnut pump stock and the screws work great. I think they were #4 phillips head from Lowes. The smallest they had and come in several lengths.
7
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by eeler1 on Today at 12:47:26 AM »Barrel bore I.D. groove tools are FUN to make ... Not !!! Exactly! I did the internal barrel groove once, years ago, on a BSA S-10. Must not have enjoyed it as I’ve avoided doing it since. 8
German AirGun Gate / Difference between the 16J and 20J HW97K?« Last post by ReturnTrip on April 19, 2024, 11:52:20 PM »In .177, is the only difference the spring?
9
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by Rick67 on April 19, 2024, 11:44:52 PM »So you did something similar to your PRod? Caliber? How'd it turn out? I was going to suggest Airgun Revisions, but you already have the barrel. I wonder if the LW .20 caliber MROD he sells has the same barrel footprint as that of an OEM’s, thus making it a drop-in. 10
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by Rick67 on April 19, 2024, 11:28:22 PM »Barrel bore I.D. groove tools are FUN to make ... Not !!! I can only imagine |