Hey guys. I'm enjoying the wealth of content surrounding this gun, thanks for sharing with us! Unfortunately though, it seems the regulator in my rifle is malfunctioning or does not work at all. The issue I'm having is that my POI is different EVERYTIME I fill the rifle to about 3600 psi. On top of that, my gun seems to fall off the regulator just after 30 shots (as I can see pellet drop). I don't have a chronograph to see the consistency/inconsistencies but I am getting around 70 shots on high. I've even bought a new scope to help isolate the issue but to no avail. Right now I'm using Crossman Premiere in 22 but am ordering some JSB 18.3 soon. Any advice would be much appreciated as I am super bummed that I'm not getting the performance that every seems to rave about. 😩😩😩
Where can you download a manual?
Thx Orion, appreciate the reply! Yes, I cleaned it thoroughly when I first got it and again while shooting yesterday. I also adjusted the trigger and it is to my liking. Andbue9, I did shoot the Barracudas but can't remember the performance (since they were the first ones I shot upon receiving the gun).I'll definitely order that Chrony you suggested along with more Barracudas and follow up if my results have changed. Thx again!
I know that every gun is different, but can anyone correlate regulator pressure with brass disk position ? Stephen?
Well, so much for that. I blew up the power adjuster. It was a loud BANG ! Does anyone know where i can get spare parts ? I might have to make one from scratch. cant find the other side with the screw in it. I'm sure it flew across the yard !
Quote from: RichH on February 15, 2019, 05:46:05 PMQuote from: thebanker4 on February 15, 2019, 04:48:08 PMRay, the only problem is that my hammer spring adjuster turns over time. Im not sure of the best way to keep it from moving. Any ideas please?https://www.vibra-tite.com/threadlockers/removable-reusable-threadlockers/vibra-tite-vc-3-threadmate/?gclid=CjwKCAiA45njBRBwEiwASnZT5wT7vvWI_6vYI4M99fXC3xaNfIpv2quNb7aK7Nn8NBjodGjpsCRsUBoC9qoQAvD_BwEThis is exactly what I used on mine. I use it on my trigger screws too.
Quote from: thebanker4 on February 15, 2019, 04:48:08 PMRay, the only problem is that my hammer spring adjuster turns over time. Im not sure of the best way to keep it from moving. Any ideas please?https://www.vibra-tite.com/threadlockers/removable-reusable-threadlockers/vibra-tite-vc-3-threadmate/?gclid=CjwKCAiA45njBRBwEiwASnZT5wT7vvWI_6vYI4M99fXC3xaNfIpv2quNb7aK7Nn8NBjodGjpsCRsUBoC9qoQAvD_BwE
Ray, the only problem is that my hammer spring adjuster turns over time. Im not sure of the best way to keep it from moving. Any ideas please?
Quote from: Abefroman on February 16, 2019, 04:57:49 PMWell, so much for that. I blew up the power adjuster. It was a loud BANG ! Does anyone know where i can get spare parts ? I might have to make one from scratch. cant find the other side with the screw in it. I'm sure it flew across the yard !Hey Mike I was afraid that would happen. That's why I didn't want to drill the small hole in the transfer port adjuster. There is just enough meat once you open it to 3/16"We will see how long mine lasts...as soon as I get some time, I'm going to try to make a backup just in case.
HMMMM,I don't know how the power adjusters on other rifles work but as this one just offers a restriction to flow but still empties the plenum therefore no change in shot count between hi and low, and POI changes between Hi and Lo not really sure about the need for the power adjuster knob on this gun. Or do I have it wrong? Not bashing the gun as I love mine!