GTA
All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Topic started by: OTmachine on March 18, 2021, 08:48:17 PM
-
Pretty sure it is Okay to openly distribute this. I have an original copy that I had scanned to a 16.5 MB .pdf file. I think it would be useful here. I can break it down into smaller consecutive pieces to upload here. Or where should it go? It is Good reference material.
Here is the cover page. Any suggestions?
TIA,
Keith
-
I don't know how many sections it would make sense to break that file into.... but if you could make sensible divisions of maybe 2 Mb each, a total of about 8-10 files, and then post each one in a separate post in this thread, with a title so that guys can navigate it.... I think then it could be made a "sticky" in this gate.... It says right on it, distribution unlimited.... Maybe ask Rocker1 first how big a file they can handle?....
Bob
-
The original copy is not fantastic, but here is part 1 of 9. See what you think.
TIA,
Keith
-
Downloaded that first part just now; looks like a good resource.
Thanks!
Jesse
-
The original copy is not fantastic, but here is part 1 of 9. See what you think.
TIA,
Keith
If it looks good to everyone, I will check that I have it divided up properly, and upload the rest tomorrow on this thread.
Keith
-
Good find.
If it is too big, the various parts of the standard and supplement pdf's are stored on the DTIC site.
-
Maybe there could be a sticky with links to some of the relevant handbooks.
For example MIL handbook 5 with material properties
https://apps.dtic.mil/dtic/tr/fulltext/u2/a295150.pdf (https://apps.dtic.mil/dtic/tr/fulltext/u2/a295150.pdf)
-
Part 2 of 9
-
Part 3 of 9
-
Part 4 of 9
-
Part 5 of 9
-
Part 6 of 9
-
Part 7 of 9
-
Part 8 of 9
-
Part 9 of 9
That's all Folks!
-
Downloaded :D
Thanks!
And to add to the resources-here's the link to download the Parker O-Ring Handbook:
(Should bring it up as a PDF viewer; you then download it from there)
http://www.parker.com/Literature/O-Ring%20Division%20Literature/ORD%205700.pdf (http://www.parker.com/Literature/O-Ring%20Division%20Literature/ORD%205700.pdf)
Jesse
-
Downloaded :D
Thanks!
And to add to the resources-here's the link to download the Parker O-Ring Handbook:
(Should bring it up as a PDF viewer; you then download it from there)
http://www.parker.com/Literature/O-Ring%20Division%20Literature/ORD%205700.pdf (http://www.parker.com/Literature/O-Ring%20Division%20Literature/ORD%205700.pdf)
Jesse
Thanks! Have that link as I do some business with them.
I just use AS-568 for American sizes, which I have downloaded, just like these folks do: https://www.globaloring.com/as568-size-chart/ (https://www.globaloring.com/as568-size-chart/)
-
Wonderful resources guys, Thank You.