Quote from: gendoc on December 21, 2022, 08:05:41 PMQuote from: Spacebus on December 21, 2022, 08:01:13 PMQuote from: gendoc on December 21, 2022, 07:50:58 PMwhen i seen in the bargain gate the 1st run of the jet was avail on ebay, i got the .22took it out of the box, cleaned the barrel, filled it up with air and test fired to 12yrds.no indication of impact. so i tried at 8yrds. still no luck.installed a known good scope and tried again at 12yrds......wow !! still no luck.then looked at the pressure gauge and it showed less that 100bar.12 shots and less than 100bar left ?i returned it for a refund and purchased the refurb np-03 kral.should be here tomorrow.my son has one and it does very well pesting at night !!12 shots is pretty spot on for a 40cc tube.really what about 8yrds on a 24x24" piece of cardboard ? could that be spot... I don't get your complaint. I only get six good shots with my regulated bandit on a full power tune. They all hit where I'm aiming, after I establish a good zero. Not sure why you expected a scope set to zero on one gun would work on another.Also weird that you are comparing the NPO3 to a budget pistol
Quote from: Spacebus on December 21, 2022, 08:01:13 PMQuote from: gendoc on December 21, 2022, 07:50:58 PMwhen i seen in the bargain gate the 1st run of the jet was avail on ebay, i got the .22took it out of the box, cleaned the barrel, filled it up with air and test fired to 12yrds.no indication of impact. so i tried at 8yrds. still no luck.installed a known good scope and tried again at 12yrds......wow !! still no luck.then looked at the pressure gauge and it showed less that 100bar.12 shots and less than 100bar left ?i returned it for a refund and purchased the refurb np-03 kral.should be here tomorrow.my son has one and it does very well pesting at night !!12 shots is pretty spot on for a 40cc tube.really what about 8yrds on a 24x24" piece of cardboard ? could that be spot...
Quote from: gendoc on December 21, 2022, 07:50:58 PMwhen i seen in the bargain gate the 1st run of the jet was avail on ebay, i got the .22took it out of the box, cleaned the barrel, filled it up with air and test fired to 12yrds.no indication of impact. so i tried at 8yrds. still no luck.installed a known good scope and tried again at 12yrds......wow !! still no luck.then looked at the pressure gauge and it showed less that 100bar.12 shots and less than 100bar left ?i returned it for a refund and purchased the refurb np-03 kral.should be here tomorrow.my son has one and it does very well pesting at night !!12 shots is pretty spot on for a 40cc tube.
when i seen in the bargain gate the 1st run of the jet was avail on ebay, i got the .22took it out of the box, cleaned the barrel, filled it up with air and test fired to 12yrds.no indication of impact. so i tried at 8yrds. still no luck.installed a known good scope and tried again at 12yrds......wow !! still no luck.then looked at the pressure gauge and it showed less that 100bar.12 shots and less than 100bar left ?i returned it for a refund and purchased the refurb np-03 kral.should be here tomorrow.my son has one and it does very well pesting at night !!
John, did you get one of the refurbs PA has for $219.99? If the Jet is a dud, I may exchange it for one of those, if they still have any available.
Quote from: Rat Sniper (AKA: PaulT58) on December 21, 2022, 08:48:23 PMJohn, did you get one of the refurbs PA has for $219.99? If the Jet is a dud, I may exchange it for one of those, if they still have any available.yes thats what i got, the refurb
Well, that was a bust...Pulled the the trailer to the landfill and Dennis met met outside the office. He said it was way wet down at the dump site and I would most likely get stuck. He said he would be happy to pull me out with the loader but wouldn't be responsible for any damage.I told him that it wasn't worth taking the chance of any of us laying in the mud and getting sick or hurt for the Holidays. He said he should have it cleaned up and ready by Tuesday. We traded Holiday greetings then Betty Lou and I came back home.Betty Lou seems to think there is more stuff that she can get on the trailer anyhow.
Quote from: avator on December 22, 2022, 11:52:00 AMWell, that was a bust...Pulled the the trailer to the landfill and Dennis met met outside the office. He said it was way wet down at the dump site and I would most likely get stuck. He said he would be happy to pull me out with the loader but wouldn't be responsible for any damage.I told him that it wasn't worth taking the chance of any of us laying in the mud and getting sick or hurt for the Holidays. He said he should have it cleaned up and ready by Tuesday. We traded Holiday greetings then Betty Lou and I came back home.Betty Lou seems to think there is more stuff that she can get on the trailer anyhow. Bill did you get lost coming back from the dump At lest it did not end up like Alice's Restaurant
I have never had much interest in Hatsan airguns, but the price on these Jet 1&2 pistols kind of has me thinking about one.Might be fun to experiment with.
Quote from: jmohme on December 22, 2022, 04:06:10 PMI have never had much interest in Hatsan airguns, but the price on these Jet 1&2 pistols kind of has me thinking about one.Might be fun to experiment with.My thought exactly. Most Hatsan airguns are pretty easy to work on and modify, and if you screw something up, you can usually get replacement parts through Hatsan USA! It may need some trigger work, a shim for the hammer spring, barrel polishing, maybe some valve work, but at that price, it worth the gamble! Also, I just learned from the SAG video that the air cylinder in the Jet 1 is hot swapable so you can get a spare and still have as many shots as the Jet 2 and maintain the slimmer design and lighter weight!
Quote from: Rat Sniper (AKA: PaulT58) on December 22, 2022, 04:32:47 PMQuote from: jmohme on December 22, 2022, 04:06:10 PMI have never had much interest in Hatsan airguns, but the price on these Jet 1&2 pistols kind of has me thinking about one.Might be fun to experiment with.My thought exactly. Most Hatsan airguns are pretty easy to work on and modify, and if you screw something up, you can usually get replacement parts through Hatsan USA! It may need some trigger work, a shim for the hammer spring, barrel polishing, maybe some valve work, but at that price, it worth the gamble! Also, I just learned from the SAG video that the air cylinder in the Jet 1 is hot swapable so you can get a spare and still have as many shots as the Jet 2 and maintain the slimmer design and lighter weight! Now I really want one! This could be my next hunting rig. Where do you get spare cylinders?
Quote from: Back_Roads on December 22, 2022, 12:02:03 PMQuote from: avator on December 22, 2022, 11:52:00 AMWell, that was a bust...Pulled the the trailer to the landfill and Dennis met met outside the office. He said it was way wet down at the dump site and I would most likely get stuck. He said he would be happy to pull me out with the loader but wouldn't be responsible for any damage.I told him that it wasn't worth taking the chance of any of us laying in the mud and getting sick or hurt for the Holidays. He said he should have it cleaned up and ready by Tuesday. We traded Holiday greetings then Betty Lou and I came back home.Betty Lou seems to think there is more stuff that she can get on the trailer anyhow. Bill did you get lost coming back from the dump At lest it did not end up like Alice's Restaurant WHAT ?? no 8X10 color glossy .......