Thank you to our advertisers!







Author Topic: ***ATI NOVA LIBERTY Modification DANGER do not drill TP Wheel***  (Read 9688 times - 2 votes) 
)

Offline AVS Stephen

  • Marksman
  • ***
  • Posts: 454
  • yes
    • AVS slugs
  • Real Name: stephen
***ATI NOVA LIBERTY Modification DANGER do not drill TP Wheel***
« on: February 21, 2019, 05:27:53 PM »
Hello All,

I'm starting to hear more and more that modifying the ATI Nova Liberty transfer port (power adjuster) wheel by drilling to 3/16" is VERY DANGEROUS. The transfer port wheel (power adjuster) can break apart and possible be very dangerous to anyone standing to the side of the gun or if you have your hand near the TP power adjust wheel when it blows apart. Once drilled to 3/16" there is not enough aluminum material and the integrity is lost.

Thank you and be safe!
« Last Edit: February 21, 2019, 05:52:59 PM by ezman604 »
  • oceanside, ny

Offline Gertrude

  • "The man who complains about the way the ball bounces is likely to be the one who dropped it."
  • GTA Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 7459
  • Hey LOOK ! ... I got a BULLSEYE ! ! !
  • Real Name: Ron
Re: ***ATI NOVA LIBERTY Modification DANGER do not drill TP Wheel***
« Reply #1 on: February 24, 2019, 02:03:34 AM »
Thanks Stephen,

Perhaps it would be a good idea to post up some of those pics into this thread (?)
 The pics I saw really drove home the point that this is a weak point and quite potentially dangerous.
  • State of Confusion
HEY ! CHECK THIS OUT >>> FIND A LOCAL SHOOTING FRIEND ON THE GTA MEMBERS MAP ! ! !

 


CLICK HERE
     https://www.zeemaps.com/group=962067 

  Feel free to place your own marker on the map.
(for your own privacy, the marker should not be placed at your exact address). just place the marker within a few miles of your home.

USE YOUR GTA SCREEN NAME WHEN PLACING YOUR MAP MARKER...So when others find you on the map, they can send you a PM here through the forum.

Offline Rohmpm

  • Marksman
  • ***
  • Posts: 331
  • yes
  • Real Name: Billy Rohm
Re: ***ATI NOVA LIBERTY Modification DANGER do not drill TP Wheel***
« Reply #2 on: February 27, 2019, 11:01:13 PM »
The "low power" port, crossdrilled across the enlarged high power port. I bored mine with no negative consequences, yet.
I'm currently making a couple of 7075t6 single power parts with an enlarged bore that I feel confident in.
  • USA, CA, YUBA CITY