I zoomed in on your second picture. It appears to have a 1800psi burst disk in case the reg fails. Not sure what pressure the downstream side is good for but if it concerns you, you can swap that to a lower burst pressure. Neat conversion!Dave
I zoomed in on your second picture. It appears to have a 1800psi burst disk in case the reg fails. Not sure what pressure the downstream side is good for but if it concerns you, you can swap that to a lower burst pressure. Dave
ok shot two quick mags thru the Chronograph. Started at about 2000 psi and shot 18 pellets. Was hard to get the magazines in until I adjusted the barrel. I had the barrel off two or three times while fitting the tank and apparently it's possible to push the barrel in a little too far to squeeze the mags. Once properly adjusted the mags worked flawlessly. Does the pressure seem correct? hard to see the tiny gauge with my 75 year old eyes even with a magnifying glass.