Barra 400e GTA member special

[a1rgunz]

Hi Geo Schoonmaker
Robert made every thing right, sent a RMA I ups the 400e back today.

Thanks for the update! Now, I need to get my hands on that 400e that was spitting curveballs...

[miksatx]

Hi Geo Schoonmaker
Robert made every thing right, sent a RMA I ups the 400e back today.

Thanks for the update! Now, I need to get my hands on that 400e that was spitting curveballs...

Lol put a 4x scope shoot it around 16yrds.

[singleshotcajun]

Got my attention. I have burned up some of the "better" Lancer AEG Airsoft carbines that left a bad  taste but I think they had plastic gears.

[Turbinator]

Ok, I finally wrapped it up, here's my full 400e review:

https://www.gatewaytoairguns.org/GTA/index.php?topic=200860.0

Need a break after that...

Turby

[miksatx]

Ok, I finally wrapped it up, here's my full 400e review:

https://www.gatewaytoairguns.org/GTA/index.php?topic=200860.0

Need a break after that...

Turby

No kidding great review Turbinator. Did you buy the new or the used that were 50 bucks cheaper?

[Turbinator]

No kidding great review Turbinator. Did you buy the new or the used that were 50 bucks cheaper?

Thanks for the kind words.

I jumped at the chance to buy the lower cost tester model.. cosmetically, I would not have been able to tell you that I got a tester model in my hands -- everything was perfect.  Kind of makes sense - I don't think they beat on these.  They pulled 50 and tested 50, probably only shot them enough to do a full function test, then put them back in the box.

Turby

[miksatx]

No kidding great review Turbinator. Did you buy the new or the used that were 50 bucks cheaper?

Thanks for the kind words.

I jumped at the chance to buy the lower cost tester model.. cosmetically, I would not have been able to tell you that I got a tester model in my hands -- everything was perfect.  Kind of makes sense - I don't think they beat on these.  They pulled 50 and tested 50, probably only shot them enough to do a full function test, then put them back in the box.

Turby

Mine was the cheaper bargain like you got but it was a shotgun in semi auto couldn’t get 2 bbs closer then 3” from each other. Everyone says it fun. I must be dead inside lol I didn’t find the mess I left myself  in my shooting area. I’ll be pulling bbs out of my casting lead for years now.

[Turbinator]

Mine was the cheaper bargain like you got but it was a shotgun in semi auto couldn’t get 2 bbs closer then 3” from each other. Everyone says it fun. I must be dead inside lol I didn’t find the mess I left myself  in my shooting area. I’ll be pulling bbs out of my casting lead for years now.

I did see your posts above chronicling your experience with the 400e.  I have no real explanations for your gun's performance, other than I am guessing that each has variances just like anything mechanical.  For it to be printing 3" groups though, after seeing the performance of mine, is a bit of a head scratcher.  Were you going to try another and give the 400e another shot, so to speak?

Turby

[miksatx]

I did see your posts above chronicling your experience with the 400e.  I have no real explanations for your gun's performance, other than I am guessing that each has variances just like anything mechanical.  For it to be printing 3" groups though, after seeing the performance of mine, is a bit of a head scratcher.  Were you going to try another and give the 400e another shot, so to speak?

Turby

Naw bbs no more. I traded the 400e for a 1100z camo in .177 gives me more to tinker with.