GTA
All Springer/NP/PCP Air Gun Discussion General => Air Guns And Related Accessories Review Gates => Topic started by: Back_Roads on January 17, 2023, 03:31:47 PM
-
I will be taking delivery of one of their products soon, I came about them on Ebay they seem to have some quality offerings and good record.
(https://i.ebayimg.com/images/g/RB4AAOSwFvNiFVNB/s-l500.jpg)
https://www.ebay.com/sch/i.html?item=115664711419&rt=nc&_trksid=p2047675.m3561.l2562&_ssn=hitfire008 (https://www.ebay.com/sch/i.html?item=115664711419&rt=nc&_trksid=p2047675.m3561.l2562&_ssn=hitfire008)
-
Well the stock made it here, may have shape shifted in route ??? I will have to investigate.
It does not look like the product I ordered, but serves the same function. I was going out on a limb that this will fit my P-17 with some minor modding. It looks like I was right, and some material removal from the mount should do the trick, I will also need to modify one hole position and fastener style.
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8763)
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8761)
-
I will add that it reminds me of the folding stock for the PP700sa but is much more robust no wobble and heavy metal.
-
Definitely looks different than the length adjustable one in your first post but not sure that it doesn’t look better.
How’s the fit for lop?
Dave
-
Definitely looks different than the length adjustable one in your first post but not sure that it doesn’t look better.
How’s the fit for lop?
Dave
LOP is 14 inches, so usable I may need to move the scope ahead an inch, but plan on upgrading the optics anyhow.
-
That store has so nice walnut pieces too!
-
Thanks for the link, James
I took notice of their stock for the PP700
It looks sturdy & appears to fold flat
However, loading clearance looks very tight
Ed
-
Thanks for the link, James
I took notice of their stock for the PP700
It looks sturdy & appears to fold flat
However, loading clearance looks very tight
Ed
LOL I actually just came back from the basement and did match the stock I got on the PP700sa and would have to notch it for the breach or put mounting holes in the grip both doable and fits the gun well otherwise, the fit difference between the p1 and the Beeman P-17 is the p17 is about 3mm 1/8th inch wider than the P1 that this was designed for, so I went out on a limb if it would be an exact fit I think I will get the Bandit / Chaser stock next, as I have a chaser in the project works area. I am on the fence though as Buck Rail has some goodies that would work well also.
-
And now for something completely different :o
Wandered the basement looking for ways to mount this on the p17, or the Chaser pistol, almost had it mounted on the chaser, then a light came on.
I grabbed my Webley Nemesis and the rest is history. I did add a red laser to the front rail, have bipod option or some type of angled fore grip 8) 8) 8)
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8773)
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8772)
-
Forgot to add this little rig weighs in now at 4Lbs 6OZ Scoped an lasered with a loaded double mag in the grip, and single shot tray in the breach. LOP is now 14.75 inches.
-
Project update added a little bit of Buck Rail LDC up front. This folding stock as with others of this style do benefit from a bit of tape shimming or I have super glued inner tube to the locking contact points to firm up the locked open position.
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8775)
-
I finished up'ished my Diana Chaser HPA TDSR project today. it breaks down to 34" x 8.75" x 4"
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8857)
-
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8856)
-
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8856)
Since photos have been disrupted I figured I will repost them.
(https://www.gatewaytoairguns.org/GTA/gallery/albums/Back_Roads_Basement/Dir_1/main_8772.jpg)
(https://www.gatewaytoairguns.org/GTA/gallery/albums/Back_Roads_Basement/Dir_1/main_8856.jpg)