Finally got it to hold air. Seemed to work after letting in an initial 50psi, letting it sit for a couple of seconds and then tapping on the pressure gauge. I took out the QD fitting, but didn't find any debris. Reinstalled but now my gauge is wonky. Oh well...I'll just rely on the gauge from the SCBA. Thanks anyways, folks!
Quote from: VaporTrail on July 17, 2022, 09:03:49 AMFinally got it to hold air. Seemed to work after letting in an initial 50psi, letting it sit for a couple of seconds and then tapping on the pressure gauge. I took out the QD fitting, but didn't find any debris. Reinstalled but now my gauge is wonky. Oh well...I'll just rely on the gauge from the SCBA. Thanks anyways, folks! I had an o-ring in the foster fitting go causing it to leak in similar manner that you describe. As for the gauge not working, could be debris in the drop block or could be mushed o-ring under the gauge. Check the trigger blade and make sure it's not touching the guard when pulled back. Sniper platform has nice and sturdy breechblock and you can do barrel size porting in .357 (I have 9mm ports in my .45) if you want more power from your gun, IIRC I got 210 fpe when I had .357 barrel in mine.
On a different note, though...is there any way to remove the stock LDC? It seems to be welded to the shroud. The stock LDC is ok, but I would really like to get a Clague on it to make it even more quiet.And it's probably wishful thinking, but are there any replacement Evanix barrels? I'm thinking a longer one will help add some push to the pellets.