GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: TennX on January 10, 2016, 04:22:52 PM
-
I have a new qb57 that came with a 177 barrel..as typical of these barrel loosens ever so often...my problem is my 22 barrel has to have a strip of rubber (for protection of threads) and channel locks to remove it..is this something I should be worried about...many thanks
-
As when you put the barrels on you need to pull the breech open a little to get it tight, you need to pull it open to unscrew it also. The breech seal is resting against he back end of the barrel and that pressure against the barrel and threads makes it hard to screw and unscrew.
-
As when you put the barrels on you need to pull the breech open a little to get it tight, you need to pull it open to unscrew it also. The breech seal is resting against he back end of the barrel and that pressure against the barrel and threads makes it hard to screw and unscrew.
Agree about breech, still needs the pliers...thanks for the reply
-
I have a new qb57 that came with a 177 barrel..as typical of these barrel loosens ever so often...my problem is my 22 barrel has to have a strip of rubber (for protection of threads) and channel locks to remove it..is this something I should be worried about...many thanks
Hi
is there a place that I can acquire the QB57 Complete Barrel Assembly .22 Cal
Thank You
-
You might check with Mike at Flying Dragon. Other than that, there is another guy but we can't mention his name here.... long story.
Anyhow....
I only have the .177 barrel for mine. I checked with the other guy a while back and he had a .22. I just never got around to grabbing it.
-
You might check with Mike at Flying Dragon. Other than that, there is another guy but we can't mention his name here.... long story.
Anyhow....
I only have the .177 barrel for mine. I checked with the other guy a while back and he had a .22. I just never got around to grabbing it.
Thank You