Been shooting my TX200 alot going through the pellet selection process and today, when returning the cocking lever, it occasionally is making a popping noise. It's like the seal is suctioned to it and pops when you return the cocking lever.This gun is vortek tuned. It was stripped of all lube and I'm using krytox 205.Is this normal? Anything to worry about? Or should I get back in there and put a light coat of 205 in the sleeve?
Upon going into full cocked position ... depressing anti-bear trap, is there ANY resistance in moving the cocking lever ?If there is & where you hear/feel this pop ... you may indeed be drawing the piston seal off the end of piston
Quote from: Motorhead on January 17, 2019, 02:22:15 AMUpon going into full cocked position ... depressing anti-bear trap, is there ANY resistance in moving the cocking lever ?If there is & where you hear/feel this pop ... you may indeed be drawing the piston seal off the end of piston When I do hear the pop, there is some slight resistance. Reminds me of a weak suction cup. I can take it apart later today. If this is the issue, what can I do to fix it? Everything seems to be working fine otherwise as you can see from my pellet thread.
Seal looks fine. There seemed to be some grease that was around the top edge of the comp tube. Cleaned it up and all is good now.
What type of oring material would you use for this?