Charlie, the second to last one is an Accutac clone, I have 2, wonderful bipods and that is the cheapest I've seen them (29.95).
Quote from: ranchibi on February 11, 2021, 05:31:05 PMCharlie, the second to last one is an Accutac clone, I have 2, wonderful bipods and that is the cheapest I've seen them (29.95).Thats what I have also. It's been a very good bipod.
The last link to a bipod looks like a good one! Thanks
Quote from: JohnnyPDX on February 13, 2021, 08:32:28 AMThe last link to a bipod looks like a good one! ThanksFrom the looks of it, it appears that you would have to push in the tiny, chrome "buttons", on the inside of the legs, lying in grove, to adjust the angulation of the legs. I would think this would be a bit cumbersome/tricky for those with larger fingers or wearing gloves.
Quote from: Xraycer on February 13, 2021, 08:47:50 AMQuote from: JohnnyPDX on February 13, 2021, 08:32:28 AMThe last link to a bipod looks like a good one! ThanksFrom the looks of it, it appears that you would have to push in the tiny, chrome "buttons", on the inside of the legs, lying in grove, to adjust the angulation of the legs. I would think this would be a bit cumbersome/tricky for those with larger fingers or wearing gloves.I agree however It works differently than that. The legs are pulled downwards to adjust the forward and rearward angles.
Quote from: JohnnyPDX on February 13, 2021, 08:55:09 AMQuote from: Xraycer on February 13, 2021, 08:47:50 AMQuote from: JohnnyPDX on February 13, 2021, 08:32:28 AMThe last link to a bipod looks like a good one! ThanksFrom the looks of it, it appears that you would have to push in the tiny, chrome "buttons", on the inside of the legs, lying in grove, to adjust the angulation of the legs. I would think this would be a bit cumbersome/tricky for those with larger fingers or wearing gloves.I agree however It works differently than that. The legs are pulled downwards to adjust the forward and rearward angles.It doesn't look like these clones work like that, in regards to the angle articulations. The upper legs looks to be a solid piece that does not pull down to unlock. Study the pic carefully. There's no separation seam to allow the legs to pull down. It's a solid piece.
Quote from: Xraycer on February 13, 2021, 09:08:33 AMQuote from: JohnnyPDX on February 13, 2021, 08:55:09 AMQuote from: Xraycer on February 13, 2021, 08:47:50 AMQuote from: JohnnyPDX on February 13, 2021, 08:32:28 AMThe last link to a bipod looks like a good one! ThanksFrom the looks of it, it appears that you would have to push in the tiny, chrome "buttons", on the inside of the legs, lying in grove, to adjust the angulation of the legs. I would think this would be a bit cumbersome/tricky for those with larger fingers or wearing gloves.I agree however It works differently than that. The legs are pulled downwards to adjust the forward and rearward angles.It doesn't look like these clones work like that, in regards to the angle articulations. The upper legs looks to be a solid piece that does not pull down to unlock. Study the pic carefully. There's no separation seam to allow the legs to pull down. It's a solid piece.I can't tell for sure but I'll know in a few days . Assuming the Amazon inexpensive version (clone) is a actually a 'clone' then...I'll find out shortly.
I just spent 10 minutes looking for an Accu-Tac knockoff video...zero, zip, nadaKnockoff arriving Tuesday
Quote from: JohnnyPDX on February 13, 2021, 09:34:30 AMI just spent 10 minutes looking for an Accu-Tac knockoff video...zero, zip, nadaKnockoff arriving TuesdayThere's your opportunity to make one and get it out there, Johnny
Quote from: Xraycer on February 13, 2021, 09:41:13 AMQuote from: JohnnyPDX on February 13, 2021, 09:34:30 AMI just spent 10 minutes looking for an Accu-Tac knockoff video...zero, zip, nadaKnockoff arriving TuesdayThere's your opportunity to make one and get it out there, Johnny People don't want to see me doing that and back to the same old question I always ask myself....... "Where's the Money?"I'll stick to shooting and I hate my own voice on video.
Quote from: JohnnyPDX on February 13, 2021, 09:43:55 AMQuote from: Xraycer on February 13, 2021, 09:41:13 AMQuote from: JohnnyPDX on February 13, 2021, 09:34:30 AMI just spent 10 minutes looking for an Accu-Tac knockoff video...zero, zip, nadaKnockoff arriving TuesdayThere's your opportunity to make one and get it out there, Johnny People don't want to see me doing that and back to the same old question I always ask myself....... "Where's the Money?"I'll stick to shooting and I hate my own voice on video.To make money on YT, you'll simply need about a million subscribers and tens of thousands of hit per video. Simple Even if you don't make substantial money, you would most likely get a lot of free stuff sent to you for review purposes. Of course, if you don't give it glowing reviews, you probably won't get as much free stuff
Quote from: Xraycer on February 13, 2021, 09:08:33 AMQuote from: JohnnyPDX on February 13, 2021, 08:55:09 AMQuote from: Xraycer on February 13, 2021, 08:47:50 AMQuote from: JohnnyPDX on February 13, 2021, 08:32:28 AMThe last link to a bipod looks like a good one! ThanksFrom the looks of it, it appears that you would have to push in the tiny, chrome "buttons", on the inside of the legs, lying in grove, to adjust the angulation of the legs. I would think this would be a bit cumbersome/tricky for those with larger fingers or wearing gloves.I agree however It works differently than that. The legs are pulled downwards to adjust the forward and rearward angles.It doesn't look like these clones work like that, in regards to the angle articulations. The upper legs looks to be a solid piece that does not pull down to unlock. Study the pic carefully. There's no separation seam to allow the legs to pull down. It's a solid piece.I have that exact bipod and the legs move to their different angles by pulling them down just like the real accu-tac.
Thank You Sir. Mystery solved.
Quote from: JohnnyPDX on February 13, 2021, 10:59:17 AMThank You Sir. Mystery solved.Totally missed this Chinglish notation lol