All Springer/NP/PCP Air Gun Discussion General > PCP/CO2/HPA Air Gun Gates "The Darkside"
Pumping Up a Beeman 2027
(1/1)
wll2506:
Starting from about 1600 PSI going up to 3000 PSI on the small 50CC tank of a Beeman 2027, how many pumps using a standard Chinese 4500psi pump does it take to fill it to 3000psi ?
Anybody that has done this please chime in, I'm very curious.
This may be a good option for me instead of bringing my bringing my compressor along with me every time I go out.
If the pumping is more than let's say 75 times that's an awful lot for me, of course I can rest a few minutes in between sets. If it's around the 50 or less, I think that's pretty doable.
Thanks guys for your response !
wll
null:
Using my Hill MK4, I can fill my PROD from 1600 to 3000 psi in about 50-60 pumps. That's a 65cc cylinder though.
wll2506:
--- Quote from: manualf150 on August 14, 2022, 03:59:15 PM ---Using my Hill MK4, I can fill my PROD from 1600 to 3000 psi in about 50-60 pumps. That's a 65cc cylinder though.
--- End quote ---
Thank you very much :-)
wll
Cslinger:
Air Arms S200t has like a 100CC cylinder IIRC. From about 110 bar to about 180 bar takes about 50 pump strokes with a Hill pump.
Navigation
[0] Message Index
Go to full version