I sent an email to MA, asking if the price that's listed is for 3 3200 psi screws or each. I'm sure it's for 3, but I wanted to be sure. I'd hate to open the package and find only 1 screw!
Quote from: YEMX on June 14, 2018, 10:27:38 PMI sent an email to MA, asking if the price that's listed is for 3 3200 psi screws or each. I'm sure it's for 3, but I wanted to be sure. I'd hate to open the package and find only 1 screw! I think I actually received 4 plus a torx head bit.
The versatility of the 22XX build is easier to change from .177 to .25 cal airgun...
19 inches seems "way long" to be deemed a pistol.It's gonna be a pardon the pun, (hand full) Ray
In the AAFTA, legal pistols are allowed 25" overall & 15" barrels
Quote from: Motorhead on June 19, 2018, 01:17:48 AMIn the AAFTA, legal pistols are allowed 25" overall & 15" barrels Those measurements seem a tad odd... How can you have a 25" OAL, but only a 15" barrel? Unless the reservoir is longer than the barrel...
Quote from: YEMX on June 19, 2018, 08:15:37 AMQuote from: Motorhead on June 19, 2018, 01:17:48 AMIn the AAFTA, legal pistols are allowed 25" overall & 15" barrels Those measurements seem a tad odd... How can you have a 25" OAL, but only a 15" barrel? Unless the reservoir is longer than the barrel... Not to disrespect anyone but that would also make for one "ODD" looking airgun.Ray
Will be keeping an eye on this as I am doing the same. I had a 9mm upper for years for a Crosman and ended up slowly collecting bits to make a Crosman based 9mm bottle gun carbine with a Steve Corcoran stock pushing 55fpe. I've recently acquired a DAQ .25 upper and will be looking to do a pistol much the same as you, but perhaps a far bit less power.Currently, aside from the 9mm build, I have two .22 based Crosman PCP conversions and considered replacing the upper on one of those, but both shoot great so I dont want to mess with them so reckon I'll go with a new build.... maybe. Still not decided. I think if I put the .25 on one it will be my one of a kind Joe Bontranger (if any of yall remember that name from YEARS ago) pistol. I'm getting around 25 shots at roughly 20fpe in it in .22 cal. Curious to know what it might do with a .25 upper.
Surprised... that name goes way back. I was able to get the 9mm upper and the pistol build from him in .22 cal before he skipped out on folks. Really wanted one of his shotguns he was making at the time, but never got one. The DAQ upper I have has the barrel with so I just need a lower. I'll figure out what I'm going to do with it, I suppose. Looking at one vendor in particular but as I'm not as familiar with the politics here, I wont mention the name, but I've worked with this person before and he's always done right by me.
Yes, I think my pistol was the last thing he shipped out. Glad I got it. I have no real expectations nor purpose for this build other than another project. Once done, I'll shoot it a little bit and it will be put up to only be shot occasionally. Much like most of my projects. Just entertainment at this point. I've seen those! Saw a low fpe .25 Ultra on another forum for sale, too. Just a bit loopy for me in .25. Then again, you can imagine how loopy my .35 carbine is running 55fpe. It's like throwing a rock.
“Plus a lot of good molds have been produced recently as well!! “I’d be interested in knowing what molds you’re speaking of . I’m always searching for something short and heavy in .25 cal .
Those measurements seem a tad odd... How can you have a 25" OAL, but only a 15" barrel? Unless the reservoir is longer than the barrel...
Not to disrespect anyone but that would also make for one "ODD" looking airgun.Ray