I'm at a loss I replace the inlet Outlet Springs twice and using the original ones now, got LED washers,I think my problem is that the pump Rod seal. air is still escaping when I try to Pump It Up
Do you have air coming out the barrel when you pump? If you followed directions above on how to adjust handle until it just cams over your pump cup is set. When set right the cup will be flush with the inlet valve hole. Handle will be within one inch of closing. It is easy to have a leak in the valve assembly or the lead seals. Pictures would help. I like tapping my valves with a wooden dowel to help seat them.JimThank you I will give that a try with the wooden dowel and try and seat the valve closer I will try and reset the bolt handle two and see what happens. Pictures don't like me here can't seem to upload even on Photobucket I'm picture challenged