Thank you to our advertisers!

Author Topic: Paper for Printing Targets  (Read 270 times))

Offline ac12

  • GTA Senior Contributor
  • ******
  • Posts: 2313
Re: Paper for Printing Targets
« Reply #20 on: June 20, 2022, 01:43:35 AM »
A note about self printed targets.

On "some" printers, the X and Y axis do not print the same. 
So the target ring might be 10mm H, but 12mm V.

If you are printing "regulation" targets, you need to measure the rings, as some printers do not print the size accurately. 
So you could be printing a target small, and making it harder on yourself.

Been there, done that.
  • San Francisco Bay Area, California, USA
10 meter target Air Pistol and Air Rifle