The GTA Library shows how to build a tool for that: https://www.gatewaytoairguns.org/GTA/library/Charlies%20Barrel%20Tool.pdf
I was able to work around having to take the barrel off, now my problem I found is the barrel is bent upwards so i'm trying to fix that.
It is the polymer coated barrel and I think I found a way to slowly bend it back. I put a clamp where the receiver is pulling the barrel down. I made some progress last night.
Will do, I dont have the money for a seal currently because I'm 15, have a girlfriend to spend money on and, am too busy with school to currently get a job. Once everything set I will update on my project.
Quote from: Woody.22 on December 15, 2021, 08:48:22 PMWill do, I dont have the money for a seal currently because I'm 15, have a girlfriend to spend money on and, am too busy with school to currently get a job. Once everything set I will update on my project.I see... Been there and understand... Im sure shes moer fun to spend on then a old dirty pellet gun 👍
Good news I got a seal from a generous member on here. He had a spare and shipped it too me. It installed easy and the gun is done accept for the moderator. Bad news I cant shoot for a while because there is a possibility I might get suspended from school because I got in a fight on the bus with a bully tonight, and I need to catch up on some schoolwork.
I have been trying to remove the barrel screw on my Gamo viper igt but the screw wont budge. Am I missing something?