Sheridan C9 safety

[wabo100]

I have a sheridan c9 f model I picked up it has the push pull safety the ball bearing was missing. Does anyone have any pictures of this setup I ordered some ball bearings and springs but it still doesn't operate correctly. Not sure they are correct I was told they were.

[Robert 5mm]

If the Model F trigger assembly is the same as the Pump C9 - i have atteched the EVP diagram.

The Pump C9 does not use a spring and ball bearing for the safety ( the Crosman 1322/1377 does )

The push safety is held in with a wire coil.

[xcalibur]

This should help

[wabo100]

Found out the ball bearing that the previous owner lost is 3mm was able to source it off of Amazon. Thanks for you help.