GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Topic started by: rsterne on June 02, 2020, 02:37:46 PM

Title: Identifying Pipe Threads
Post by: rsterne on June 02, 2020, 02:37:46 PM
Here is an excellent link for identifying pipe threads....

https://trimantec.com/blogs/t/thread-identification-guide

The common ones we see are 1/8"-27 NPT, 1/8"-28 BSPP, and M10 x 1 mm Metric Pipe threads.... Most are available in straight (requires a sealing washer or O-ring) or tapered (seals on the threads, using Teflon tape)....

Bob
Title: Re: Identifying Pipe Threads
Post by: Tonykarter on June 02, 2020, 02:46:17 PM
EXCELLENT find!  Thanks Bob.  Can this be stickied? I see a time in the future when I will need it and not be able to find it.
Title: Re: Identifying Pipe Threads
Post by: rsterne on June 02, 2020, 03:06:26 PM
It already is!....

Bob
Title: Re: Identifying Pipe Threads
Post by: bnowlin on June 02, 2020, 10:12:34 PM
Thanks Bob, that very helpful.
Bob