Umarex Origin: Install Strip Stak Pak

[Hajimoto]

A step by step video tutorial of how to ventilate and install the HP Air Stripper, Stand Off and Baffles.

A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. Air Stripper comes with o-ring and silicone grease for installation.

[ccwilder3]

How much does this quite the Origin compared to stock?

[Hajimoto]

How much does this quite the Origin compared to stock?

Sorry but I do not have a laboratory with certified sound pressure meters to quantify the sound reduction but you will definitely hear a difference.
The main thing you will notice right away is the tone of the shot is lower and less reverberating.
As a reminder, baffles and air strippers do more for the airstream than just reduce sound, they reduce turbulence as well.
Less turbulence results in a smoother launch of the projectile from the muzzle.

[ccwilder3]

Thanks for the reply. Would this interfere with the DonnyFL adapter and silencer?

Between the strip stak and silencer, it should really quiten the gun.

[Hajimoto]

Thanks for the reply. Would this interfere with the DonnyFL adapter and silencer?

Between the strip stak and silencer, it should really quiten the gun.

The strip stak pak cannot be used with the DonnyFL A70 but can be used with the A50.

[oldpro]

 Half as loud as stock is how I would describe it.

[bduares]

Whatever happened to your comprehensive review of the Umarex Origin? Says it was moved to "recycle"?

[Hajimoto]

Whatever happened to your comprehensive review of the Umarex Origin? Says it was moved to "recycle"?

Check the Grip review area


https://www.gatewaytoairguns.org/GTA/index.php?board=253.0