GTA
All Springer/NP/PCP Air Gun Discussion General => Vintage Air Gun Gate => Topic started by: Pelle on June 15, 2022, 09:35:49 PM
-
Haven't taken the ride up to the gunstore in awhile and yippee he has been awaiten for me. Comes out with a, kids, Western rig. C Single Action 6.The co2 seal is shot, at minimum. I spy the grey color and wonder. Yes its sanded down but looks ok, not black. Seems to be in great shape, otherwise.
-
I put in a removed seal from another old Crosman and it held gas and fired. A while later, I fired and got squib and thought it leaked out but it didnt. I messed up removing the stuck pellet and now its apart, gave me a hard time. Anyone re position the hammer spring?
-
So yeah I moved the hammer spring and now get the gas dumping out the barrel for some reason
-
Was not easy, but fashioned an end seal from a hardened tube of urathane caulk. Put one in a C 1600 Bb pistol and then ended up with both working well, I even steroided the 1600 and they are zipping out now. Just waiting for them to both start leaking,
-
Any ideas on which end seal goes in this valve? There are measurements but I see nothing that matches up. There is a larger or smaller one.. The bottom of CO2 area is about .490. Thanks
-
Hi Rocky, I believe the early valves were superseded and might not match the seals currently available.
I resealed a Hahn 45 with this issue. IIRC, I ended up arranging an oring near the neck of the cartridge.
-
I will let you know the results. There should be a few seals in, hopefully tomorrow. My urethane seems to be silicone. They did work for a little while so I knew the insides were good. I did put some new Viton rings, anyways, at least on the SA6
-
I guess I got ripped off again. They think (said) I ordered a part that I knew was wrong. No plans to even try to fix things. I have dealt with an Ebay guy that is way way better than the the two big companys, that I ordered from, that were way more money. T
-
bag gun