Glad to help and enjoy the tack driver/rabbit slayer.BD
If it’s any consolation, in no other type of tuning effort do I burn through as many pellets as a bstaley tune. No doubt, once you find the right combination of settings, you don’t want anything to drift.
I'm just proud to see someone with the patience to get through a B Staley tune anymore.... I personally don't have it. 3-5 day shipping from Huma is too great of a temptation, lol..Great job with the tune.
Quote from: buldawg76 on April 16, 2021, 03:15:10 AMGlad to help and enjoy the tack driver/rabbit slayer.BDHi Mike.Seems all wasn't quite how I thought it was.The hammer throw adjuster was loose. Every string I shot, it was self adjusting.Now rectified it with a lock washer and getting some very different looking strings.I still have 20 stable shots, but these are now between about 2500psi and 1900psi. It will do for a minute, but I'll definitely reg it soon.Took me a while to firgure out what was going on. I put almost a whole tin through it yesterday, getting it to shoot an acceptable string.
Quote from: robs5230 on April 16, 2021, 04:45:37 AMQuote from: buldawg76 on April 16, 2021, 03:15:10 AMGlad to help and enjoy the tack driver/rabbit slayer.BDHi Mike.Seems all wasn't quite how I thought it was.The hammer throw adjuster was loose. Every string I shot, it was self adjusting.Now rectified it with a lock washer and getting some very different looking strings.I still have 20 stable shots, but these are now between about 2500psi and 1900psi. It will do for a minute, but I'll definitely reg it soon.Took me a while to firgure out what was going on. I put almost a whole tin through it yesterday, getting it to shoot an acceptable string.I guess I am just so used to adding a drop of pink loctite to my fasteners that I forget to mention it to others. I either use it to secure the hammer spring adjuster or drill a hole in side of end cap and tap it for a set screw with a piece of weed eater line to tighten against the adjuster to keep it from rotating with every hammer cock since the spring tends to wind up and unwind dragging the adjuster with it in the process.Regging is much easier on the tuning process.BD