Where's the best place to purchase a 10.1" Crosman .22 barrel, and what should I expect to pay? I have a LDC for my 2240, but the stock barrel is too short to load a CO2 cartridge when the LDC is installed. Also, any thoughts on how to retain the front sight? I don't have a scope on this one, just iron sights. Thanks...
Quote from: PaulT58 on June 19, 2017, 10:52:00 PMWhere's the best place to purchase a 10.1" Crosman .22 barrel, and what should I expect to pay? I have a LDC for my 2240, but the stock barrel is too short to load a CO2 cartridge when the LDC is installed. Also, any thoughts on how to retain the front sight? I don't have a scope on this one, just iron sights. Thanks...Crosman, you need a part number? Just cut it down to what you want. I'd test it shooting a while before cutting it down and I'd run a pellet through it to see if it's loose in certain areas. Why a 10"? Are you just keeping it short?
Yes they will sell you a barrel, the part # is: 1322-064. It is a 10.25" barrel found on the 1322. you can grind the hump out of the sight on the 2240, center it, and put a little epoxy on it to hold it in place. I have done this before and it works great. Have fun!!
JUst a FYI , I have 2 2240 both with TKO LDC and zero problems with cart.....good luckI have a stock barrel from a 1322 that your welcome to if it will work....
Paul, You might want to put a "wanted" add over in the Classifieds section.Tons of people mod the 13XX and the original 10" barrel is usually the first to go in favor of a 14" or 18".While the 10" is sweet on a 2240, some guys just have pumpers with several original barrels laying around with no use for them...Also I could have SWORE there was an older thread here that we could list 13XX and 22XX parts for swap or trade.
Quote from: TennX on June 20, 2017, 08:17:09 AMJUst a FYI , I have 2 2240 both with TKO LDC and zero problems with cart.....good luckI have a stock barrel from a 1322 that your welcome to if it will work....Phil, what's the length of the 1322 barrel you have? Also, how big around if the TKO LDC? Wondering if it's narrower than the two I have which are both the same diameter. Are the barrels on your 2240's the stock length? Curious why I'm having these issues...
Quote from: PaulT58 on June 20, 2017, 08:24:19 AMQuote from: TennX on June 20, 2017, 08:17:09 AMJUst a FYI , I have 2 2240 both with TKO LDC and zero problems with cart.....good luckI have a stock barrel from a 1322 that your welcome to if it will work....Phil, what's the length of the 1322 barrel you have? Also, how big around if the TKO LDC? Wondering if it's narrower than the two I have which are both the same diameter. Are the barrels on your 2240's the stock length? Curious why I'm having these issues...My bad one is a 2300 but same gun.....The barrels are the stock lengths , I do have a couple of cheeper LDC that dont work...but the TKO brand has a nice taper thats perfect...I will have to find the barrel....maybe someone will chime in with length..but as I said your more than welcome to it free of charge......................soon as I find it....LOLhttp://tko22.com/
Good form Phil!Take him up on it Paul.The 1322 10" barrel will be plug-n-play.
Quote from: TennX on June 20, 2017, 08:17:09 AMJUst a FYI , I have 2 2240 both with TKO LDC and zero problems with cart.....good luckI have a stock barrel from a 1322 that your welcome to if it will work....Is the 1322 barrel spoken for?Matt
Not as good as free, but I have one of the Mellon air crowned 10" barrels on my 2240. It is very accurate. I think they are listed at $20