Tip on red dots, I use the top of the dot as my zero/aim point, the bottom of the dot = holdover, much like an open sight.
That open type Pinty,Looks exactly like the Westlake I have.I looked at the seeall website, which one of the sights did you use? I am guessing the Mk2 rail mount, tritium or edge glow, whatever that means.
I just ordered one the MK 2 as I finally figured out it had a lever vs allen screw for the clamp. They also have a 25% discount code right now hunt25 if you are interested, made it $74.97 delivered.. I went with the crosshair model, as I doubt that I will need the fast target acquisition afforded more by the delta point.
I still want to try a scope for longer range accuracy, and have a BSA 2x pistol scope. I was diggin around in my parts box and found a set of either Warne or Tally quick detachable rings, the kind that have a little removeable recoil bar in the bottom of the ring. I found that one fits the slot of the Zoraki perfectly and removing that bar in the other ring it sits down nicely on the rail and clamps down tightly, so I can have a scope with two rings holding it.
The rings I have are high, so should allow room for my hand.
I found this 1/2" riser on Amazon, one of the clamp screws is flattened so riser will sit flat on the Zoraki rail, and it is a perfect full length for the Zoraki rail.I looked at the product pictures closely before taking a chance on it and it fits fine.