Author Topic: Crosman 1322 stock cheek riser  (Read 544 times))

Offline Marquette

  • Plinker
  • **
  • Posts: 106
  • yes
  • Real Name: Rich
Crosman 1322 stock cheek riser
« on: April 19, 2021, 01:04:28 AM »
Hi
    Anyone printing a cheek riser to fit the 1322 stock?
  • USA, MN, Maple Grove

Offline Marquette

  • Plinker
  • **
  • Posts: 106
  • yes
  • Real Name: Rich
Re: Crosman 1322 stock cheek riser
« Reply #1 on: April 19, 2021, 11:44:44 AM »
I found a 1322 cheek riser on Thingiverse by a designer Dustybarn.  Looks like a nice riser.  How do I get one printed? 
  • USA, MN, Maple Grove

Offline Insanity

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 3946
  • Real Name: Matt
Re: Crosman 1322 stock cheek riser
« Reply #2 on: April 19, 2021, 08:13:07 PM »
There are several members who can print it for you. I can but I would like to see other members get some business also. I have a large order in and waiting on a new main board for my ender 3 to come in to finish that up.
  • Carey OH
Do you need 3D printing services? Check here and see what members can provide for you.

https://www.gatewaytoairguns.org/GTA/index.php?topic=186969.0

Offline Marquette

  • Plinker
  • **
  • Posts: 106
  • yes
  • Real Name: Rich
Re: Crosman 1322 stock cheek riser
« Reply #3 on: April 19, 2021, 08:19:44 PM »
I didnít know there were members who offered that service. How do I contact them?  Should I post in the classifieds?   Thanks for the guidance to how to get it printed.
  • USA, MN, Maple Grove

Offline Insanity

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 3946
  • Real Name: Matt
Re: Crosman 1322 stock cheek riser
« Reply #4 on: April 19, 2021, 08:22:42 PM »
You can post there it may get you quicker response than this gate. At one time I had a list of members who offer printing services but that list is now gone. If noone offers to help I will do it but the wait time may not be acceptable for you.
  • Carey OH
Do you need 3D printing services? Check here and see what members can provide for you.

https://www.gatewaytoairguns.org/GTA/index.php?topic=186969.0

Offline Bentong

  • GTA Senior Contributor
  • ******
  • Posts: 2427
  • Real Name: Leo
  • B3c👀l Oragon

Offline Marquette

  • Plinker
  • **
  • Posts: 106
  • yes
  • Real Name: Rich
Re: Crosman 1322 stock cheek riser
« Reply #6 on: April 19, 2021, 08:54:53 PM »
Hi
   I already have a ATI SKS cheek riser.  Looking for something a little higher and more stable on the top of the stock
  • USA, MN, Maple Grove

Offline CraigH

  • GTA Senior Contributor
  • ******
  • Posts: 3330
  • Real Name: Craig
Re: Crosman 1322 stock cheek riser
« Reply #7 on: April 19, 2021, 09:05:56 PM »
The ATI SKS cheek riser works quite well with perhaps 5 minutes using a rat-tail file to contour the contact points to the shape of the 1399 skeleton stock.
  • Lone Tree, Colorado
With freedom comes a terrible responsibility

Offline scion19801

  • Expert
  • *****
  • Posts: 1074
  • yes
  • Real Name: Dan
Re: Crosman 1322 stock cheek riser
« Reply #8 on: April 19, 2021, 11:08:21 PM »
I could do it with no issue in pet-g. I have black or grey. Iíll get it downloaded and loaded into my slicer tomorrow afternoon. Then we can discuss pricing once I see what the print hours are one and material use. That is if youíre still looking for it.
  • USA, NY, Ithaca
Umarex Gauntlet .25, Hawke vantage 3-12x44 sf, jsar super tune kit, adjustable flex regulator, .38l bottle, rocker1 LDC

Airforce Condor .25 cal, Custom LDC. .145" tophat, power wheel 10, 24-2500 psi fills. 3d printed bipod adapter. Nikko mountmaster 3-12x50AO

FX Impact MK2 700mm .25 cal, element helix 6-24x50, slug kit, both superior liners, slug A liner, carbon fiber barrel liners. .22 stx original pellet liner and slug A liner in 700 mm.

3d printing services as well. just send me an PM

Offline Insanity

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 3946
  • Real Name: Matt
Re: Crosman 1322 stock cheek riser
« Reply #9 on: April 19, 2021, 11:18:52 PM »
Thanks Dan hope you can help him out.
  • Carey OH
Do you need 3D printing services? Check here and see what members can provide for you.

https://www.gatewaytoairguns.org/GTA/index.php?topic=186969.0

Offline Rick67

  • GTA Senior Contributor
  • ******
  • Posts: 3823
  • yes
  • Real Name: Richard
Re: Crosman 1322 stock cheek riser
« Reply #10 on: April 19, 2021, 11:45:46 PM »
Hi
   I already have a ATI SKS cheek riser.  Looking for something a little higher and more stable on the top of the stock



Check out this guy's Crosman 1399 cheek riser:



https://www.gatewaytoairguns.org/GTA/index.php?topic=186078.0



Personally, I do not like 3D-printed stuff, but it is what you want.

His looks to be an excellent design though.
  • Abq., NM, USA

Offline scion19801

  • Expert
  • *****
  • Posts: 1074
  • yes
  • Real Name: Dan
Re: Crosman 1322 stock cheek riser
« Reply #11 on: April 20, 2021, 11:49:17 AM »
ok so I got it loaded up and into my slice gonna be a 10 hour and 30 min print. so that is no issue. once i hear from you it's just a matter of loading it to my printer and letting it run.
  • USA, NY, Ithaca
Umarex Gauntlet .25, Hawke vantage 3-12x44 sf, jsar super tune kit, adjustable flex regulator, .38l bottle, rocker1 LDC

Airforce Condor .25 cal, Custom LDC. .145" tophat, power wheel 10, 24-2500 psi fills. 3d printed bipod adapter. Nikko mountmaster 3-12x50AO

FX Impact MK2 700mm .25 cal, element helix 6-24x50, slug kit, both superior liners, slug A liner, carbon fiber barrel liners. .22 stx original pellet liner and slug A liner in 700 mm.

3d printing services as well. just send me an PM

Offline Marquette

  • Plinker
  • **
  • Posts: 106
  • yes
  • Real Name: Rich
Re: Crosman 1322 stock cheek riser
« Reply #12 on: April 21, 2021, 02:01:40 AM »
scion19801
      Sent you a pm. 
  • USA, MN, Maple Grove

Offline scion19801

  • Expert
  • *****
  • Posts: 1074
  • yes
  • Real Name: Dan
Re: Crosman 1322 stock cheek riser
« Reply #13 on: April 21, 2021, 02:42:20 AM »
Got it. Iíll get the print started tomorrow morning. If all goes well I might even be able to get it mailed tomorrow as well. If not the following day.
  • USA, NY, Ithaca
Umarex Gauntlet .25, Hawke vantage 3-12x44 sf, jsar super tune kit, adjustable flex regulator, .38l bottle, rocker1 LDC

Airforce Condor .25 cal, Custom LDC. .145" tophat, power wheel 10, 24-2500 psi fills. 3d printed bipod adapter. Nikko mountmaster 3-12x50AO

FX Impact MK2 700mm .25 cal, element helix 6-24x50, slug kit, both superior liners, slug A liner, carbon fiber barrel liners. .22 stx original pellet liner and slug A liner in 700 mm.

3d printing services as well. just send me an PM

Offline scion19801

  • Expert
  • *****
  • Posts: 1074
  • yes
  • Real Name: Dan
Re: Crosman 1322 stock cheek riser
« Reply #14 on: April 22, 2021, 03:54:20 PM »
Part printed flawlessly and has been dropped off to USPS and is on its way to you. TY for your business Marquette.
  • USA, NY, Ithaca
Umarex Gauntlet .25, Hawke vantage 3-12x44 sf, jsar super tune kit, adjustable flex regulator, .38l bottle, rocker1 LDC

Airforce Condor .25 cal, Custom LDC. .145" tophat, power wheel 10, 24-2500 psi fills. 3d printed bipod adapter. Nikko mountmaster 3-12x50AO

FX Impact MK2 700mm .25 cal, element helix 6-24x50, slug kit, both superior liners, slug A liner, carbon fiber barrel liners. .22 stx original pellet liner and slug A liner in 700 mm.

3d printing services as well. just send me an PM