PyramydAir The Airgun Experts Umarex USA Airguns Utah Airguns Nielson Specialty Ammo Nielson Specialty Ammo FX Airguns DonnyFL Airgun Archery Fun Saber Tactical New England Airguns Evanix Airguns at Airgun Pro Shop Sekhmet USA Freedom Targets AirgunWeb Old School Airgun Reviews Hajimoto Productions Airgun Angie - Backyard Shooting Air Tanks Plus Jefferson State Air Rifles PyramydAir The Airgun Experts Umarex USA Airguns Utah Airguns Nielson Specialty Ammo Nielson Specialty Ammo FX Airguns DonnyFL Airgun Archery Fun Saber Tactical New England Airguns Evanix Airguns at Airgun Pro Shop Sekhmet USA Freedom Targets AirgunWeb Old School Airgun Reviews Hajimoto Productions Airgun Angie - Backyard Shooting Air Tanks Plus Jefferson State Air Rifles PyramydAir The Airgun Experts Umarex USA Airguns Utah Airguns Nielson Specialty Ammo Nielson Specialty Ammo FX Airguns DonnyFL Airgun Archery Fun Saber Tactical New England Airguns Evanix Airguns at Airgun Pro Shop Sekhmet USA Freedom Targets AirgunWeb Old School Airgun Reviews Hajimoto Productions Airgun Angie - Backyard Shooting Air Tanks Plus Jefferson State Air Rifles PyramydAir The Airgun Experts Umarex USA Airguns Utah Airguns Nielson Specialty Ammo Nielson Specialty Ammo FX Airguns DonnyFL Airgun Archery Fun Saber Tactical New England Airguns Evanix Airguns at Airgun Pro Shop Sekhmet USA Freedom Targets AirgunWeb Old School Airgun Reviews Hajimoto Productions Airgun Angie - Backyard Shooting Air Tanks Plus Jefferson State Air Rifles


Author Topic: We Need a Moderator  (Read 431 times))

Offline rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 25254
  • GTA Forums Person of the Year 2017
  • Real Name: Bob
We Need a Moderator
« on: March 07, 2021, 02:30:14 PM »
In case you don't know, marty2 is no longer involved as a Mod here at the GTA, and is doing little airgun shooting.... He has been looking after the NUAH "Long Range Club" Membership and 100 yard Match Gates since 2016, but will no longer be available to continue.... I for one, will miss his dedication....  :( .... Travis is aware of this, but so far nobody has stepped forward to take over Moderating these two Gates....

If any of you are interested, and have the time and energy to look after NUAH, please contact Travis (oldpro) and let him know.... You would be responsible for placing new members in the appropriate Division, once they have met the Rules for Membership.... I can continue to supply a new Chart showing how the members are spread between the Divisions a few times a year for you to post.... You would also need to post the monthly 100 yard Matches.... Marty did them every 4 weeks from early April to mid-October, 8 per year.... That would include posting the results at the conclusion of each Match....

Bob
« Last Edit: March 07, 2021, 03:49:00 PM by rsterne »
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsenal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), XS-60c HPA in .30 cal (90 FPE), .22 cal QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Benchrest PCP, .172/6mm Regulated PCP and .224/.257 Unregulated, Three regulated BRods in .25 cal (70 FPE), .30 cal (100 FPE) & .35 cal (145 FPE), .257 Condor (180 FPE).

Offline JuryRigger

  • NUAH Club Member
  • GTA Senior Contributor
  • ******
  • Posts: 2056
  • Chasing down 2 MOA @ 100 yds with a springer
  • Real Name: Jesse
Re: We Need a Moderator
« Reply #1 on: March 08, 2021, 09:46:25 AM »
Sorry to hear that; I hope he is in good health?
I might consider the task; except for I am still relatively new here; and am not completely sure that I am up to it. I haven't paid much attention to the 100 yard matches; I assume that he essentially was starting a thread; and scoring the targets as they came in?
Edit-just looked; and it doesn't look too hard; much like I thought it would be.
I need to think about it some; since I do not always have the time that I would like; but if I would qualify for the job; I may consider applying for it.
Jesse
« Last Edit: March 08, 2021, 10:33:22 AM by JuryRigger »
  • Buckeye State
In a time of changing hearts and Great Unknown...
"Power is in tearing human minds to pieces and putting them back together in shapes of your own choosing"-Orwell
My .22" Diana 350 N-Tec Magnum-
(Sorry, but you are not allowed to access the gallery)

Offline rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 25254
  • GTA Forums Person of the Year 2017
  • Real Name: Bob
Re: We Need a Moderator
« Reply #2 on: March 08, 2021, 02:12:14 PM »
If you are interested, contact Travis (oldpro) and volunteer.... I can probably answer any questions you have, and would be glad to assist you....

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsenal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), XS-60c HPA in .30 cal (90 FPE), .22 cal QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Benchrest PCP, .172/6mm Regulated PCP and .224/.257 Unregulated, Three regulated BRods in .25 cal (70 FPE), .30 cal (100 FPE) & .35 cal (145 FPE), .257 Condor (180 FPE).

Offline JuryRigger

  • NUAH Club Member
  • GTA Senior Contributor
  • ******
  • Posts: 2056
  • Chasing down 2 MOA @ 100 yds with a springer
  • Real Name: Jesse
Re: We Need a Moderator
« Reply #3 on: March 08, 2021, 02:25:26 PM »
I sent Travis a PM; I don't have the time at the moment; but do have several questions. Thanks Bob;
Jesse
  • Buckeye State
In a time of changing hearts and Great Unknown...
"Power is in tearing human minds to pieces and putting them back together in shapes of your own choosing"-Orwell
My .22" Diana 350 N-Tec Magnum-
(Sorry, but you are not allowed to access the gallery)

Offline mrbulk

  • GTA Senior Contributor
  • ******
  • Posts: 6419
  • Little things affect little minds” - Thoreau
  • Real Name: Charlie
Re: We Need a Moderator
« Reply #4 on: March 08, 2021, 02:31:45 PM »
Awww man, I clicked on here because I thought it was about LDCs... ;D

Just kidding, and good luck to Jesse!
  • Las Vegas, NV, USA
Remember that none of this will matter in a hundred years. Have fun now.

Offline JuryRigger

  • NUAH Club Member
  • GTA Senior Contributor
  • ******
  • Posts: 2056
  • Chasing down 2 MOA @ 100 yds with a springer
  • Real Name: Jesse
Re: We Need a Moderator
« Reply #5 on: March 08, 2021, 06:23:55 PM »
Awww man, I clicked on here because I thought it was about LDCs... ;D

Just kidding, and good luck to Jesse!
Well; I don't know if I will end up as the mod here; it would be nice to contribute to the forum in a more involved way, though.  :D
Thanks; and hopefully life will turn for the better for Marty2, even if he does not return to moderate these gates.
Jesse
« Last Edit: March 08, 2021, 06:26:28 PM by JuryRigger »
  • Buckeye State
In a time of changing hearts and Great Unknown...
"Power is in tearing human minds to pieces and putting them back together in shapes of your own choosing"-Orwell
My .22" Diana 350 N-Tec Magnum-
(Sorry, but you are not allowed to access the gallery)

Offline rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 25254
  • GTA Forums Person of the Year 2017
  • Real Name: Bob
Re: We Need a Moderator
« Reply #6 on: March 23, 2021, 05:52:47 PM »
KevinJBrown has just been appointed Moderator for this Gate.... Congrats and thanks to those who volunteered to be considered....

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsenal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), XS-60c HPA in .30 cal (90 FPE), .22 cal QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Benchrest PCP, .172/6mm Regulated PCP and .224/.257 Unregulated, Three regulated BRods in .25 cal (70 FPE), .30 cal (100 FPE) & .35 cal (145 FPE), .257 Condor (180 FPE).