So what did you Order / Receive today ? (to feed the "Beast" that lives within)

[bear air]

I ordered a couple barrel bands from buck rail that I'm hoping work on a couple different guns. I know the one will for sure and by the looks of it the other one will too. Then I ordered a tan set of scope caps to match a scope and rifle I have.

[Back_Roads]

Well I went and did it
Ordered a .22 Huben gk1-pistol from  https://www.newenglandairguns.com/huben-gk1-pistol.html

In hand and shot a handful of times . . .

[Rat Sniper (AKA: PaulT58)]

I received my GK-1 in .25 today!  Very nice pistol!  I've not had a chance to shoot it yet, but did air it up to 350 BAR and will see how well it holds air.  Below is a picture of it next to the Ataman AP-16 Standard for size comparison.

[Back_Roads]

  I think you may like it alot Paul  Did some research on the Ataman AP16, Gives me ideas LOL

[Whirligig]

Shooting the Dragonfly Mk2 a little each day. No issues so far. Really liking the light and predictable trigger. It just seems to be a great pumper for an adult.

-W

[tjk]

Today UPS dropped off two long boxes.
One box had a new .177 Diana Storm Rider. Neat little urban bushy tail buster. Already have a reg, new pressure fill cap, a barrel band, and a few extra mags on order. I studied this rifle on YouTube and the forum posts and glad I got it. Super lite and decent open sights too. I could have put the first few sight in shots at 15’ish yards inside a nickel. Gonna need some trigger work  for sure. But a solid platform. And then,…
The other box had a brand new HW35E with walnut stock. Typical Weihrauch “in the raw” condition. The walnut stock is simply gorgeous!!! I got really lucky with this one. This is one of the best “non custom stock” pieces of walnut on an air rifle,…or any other mass produced gun of any type I have ever seen!!! Deep Vivid tiger striping on both sides. Was hoping to get the older finger groove stock,….(as advertised !!!!!) but received the newer, and crappier cheaply forestocked checkering with the Weihrauch name stamped on it. 🤬😡 Ruins the look of the gun and an absolute waste of otherwise an incredible piece of furniture. Also have yet another Minnelli “hieroglyphic” stamp on the pistol grip.🤔 Still a great gun regardless, but why update a classic that needs no updating??? 🤷🏼‍♂️
On the flip side, I should be thankful that I am blessed to have these rifles. And I am.

[bReTt]

Bought more 22lr ammo. 

[triggerfest]

Today UPS dropped off two long boxes.
One box had a new .177 Diana Storm Rider. Neat little urban bushy tail buster. Already have a reg, new pressure fill cap, a barrel band, and a few extra mags on order. I studied this rifle on YouTube and the forum posts and glad I got it. Super lite and decent open sights too. I could have put the first few sight in shots at 15’ish yards inside a nickel. Gonna need some trigger work  for sure. But a solid platform. And then,…
The other box had a brand new HW35E with walnut stock. Typical Weihrauch “in the raw” condition. The walnut stock is simply gorgeous!!! I got really lucky with this one. This is one of the best “non custom stock” pieces of walnut on an air rifle,…or any other mass produced gun of any type I have ever seen!!! Deep Vivid tiger striping on both sides. Was hoping to get the older finger groove stock,….(as advertised !!!!!) but received the newer, and crappier cheaply forestocked checkering with the Weihrauch name stamped on it. 🤬😡 Ruins the look of the gun and an absolute waste of otherwise an incredible piece of furniture. Also have yet another Minnelli “hieroglyphic” stamp on the pistol grip.🤔 Still a great gun regardless, but why update a classic that needs no updating??? 🤷🏼‍♂️
On the flip side, I should be thankful that I am blessed to have these rifles. And I am.

That are really nice purchases !

I am still eyeing the Storm Rider as well. I like carabine sized, lightweight PCP airguns. Let's us know your first finding pls

Regarding the HW35E.... it is the only nice and even beautiful stock that Weihrauch sells (the rest is literally like a kitchen table leg furniture look imho).

[A.K.A. Tommy Boy]

Well I went and did it
Ordered a .22 Huben gk1-pistol from  https://www.newenglandairguns.com/huben-gk1-pistol.html

Hi James.

I've been looking at all of your posts on this pistol.

I saw the picture of the one that you received.

Wow..that one is Really NICE !   



Best Wishes - Tom

[Firewalker]

Bought more 22lr ammo.

Outdoor Limited? Buying a case.

[bReTt]

Bought more 22lr ammo.

Outdoor Limited? Buying a case.

Not from OL.  Another 1000 rounds from Wally World Winchester M22

[Methuselah]

Crosman 362 Anniversary. I'm officially an addict.

[Back_Roads]

Crosman 362 Anniversary. I'm officially an addict.

Well Happy Anniversary LOL

[Back_Roads]

Well I went and did it
Ordered a .22 Huben gk1-pistol from  https://www.newenglandairguns.com/huben-gk1-pistol.html

Hi James.

I've been looking at all of your posts on this pistol.

I saw the picture of the one that you received.

Wow..that one is Really NICE !   



Best Wishes - Tom

Thanks Tom, it has been good so far, today I had a chance to top it off with air. Just not much shooting time in a day ATM.

[Methuselah]

Crosman 362 Anniversary. I'm officially an addict.

Well Happy Anniversary LOL

TY!
 

[Whirligig]

For those interested, I'm getting about 730 fps shooting.22-caliber 15.43 grain BSA Storm pellets (18.26 FPE) at the muzzle with 12 pumps of the Seneca Dragonfly Mk2.

I am impressed.

-W

[kbstingwing]

Renewed my hunting and fishing licenses.

[2A Georgia]

I got a 4th Flambeau Case for the Notos from wallyworld.  I can fit two in the back of the HRV and will be packing the Gamo Jumper and Notos for after work safaris.  It will be ID'ed by the CARM decals :-)

[bantam5s]

My mom's husband found this thing for me at the dump where he works.

It was in a bag " field stripped " and surprisingly it's all there.
It works too, but needs a cartridge seal and being a Gamo I expect I'll probably have to get creative if I think it's even worth fixing.

[cjtamu]

My mom's husband found this thing for me at the dump where he works.

It was in a bag " field stripped " and surprisingly it's all there.
It works too, but needs a cartridge seal and being a Gamo I expect I'll probably have to get creative if I think it's even worth fixing.

Was able to buy seals from Gamo for one about a year ago. Don’t know if they’ve changed their tune since then or no.