Donation

Support Equipment For PCP/HPA/CO2 and springers ,rams > Support Equipment For PCP/HPA/CO2

Scuba tanks????

(1/8) > >>

pyroboy33:
I am sorry if this has been already addressed but I've searched and not found anything. Here is a tank I found (http://www.sotmau.com/Luxfer-Aluminum-80-Tank-Natural-W-Valve-p19874324/) seems like a good price to me, fittings would be another 50$. Here is my question the tank is a 3000 psi model, I currently own a disco I know that the tank would be good for filling that many times but I currently am looking at purchasing a p-rod, how efficient would a 3000 psi tank be for filling the prod to a little under full fill pressure lets say 2800 psi?

1377x:
there is a fill calculator in the gta library

pyroboy33:
thanks, dint even know about that  :-[.

Archersparadox:
..you may want to consider a Ninja Carbon Fiber Tank 4,500 PSI, figure on about 37 refills for a 2,000 PSI start and re-fill at 1,200 PSI...

threex4:
I have a 30cf 3000psi and when I get it filled it usually gets filled to the max around 3300psi. that alone will give ya a few more fills. for the disco , you should get about 15-20 IMSMR. My PRod I get about 10 fills on the 30cf. so the 80 should get you a few more.
I would look for a place that includes a K Valve along with the tank, mine did.

Navigation

[0] Message Index

[#] Next page