Donation

All Springer/NP/PCP Air Gun Discussion General > PCP/CO2/HPA Air Gun Gates "The Darkside"

Cricket tactical .22 inconsistent. Solution please?

(1/1)

mubhaur:
Someone gave me his Cricket tactical for fixing the issue of inconsistency.

I chronied it and it was like 880 fps, 970fps, 940fps etc.

Neither its behaviour is of unregulated gun nor like a regulated gun.

The owner has already given it to two tuners but no one could fix it.

He also installed Huma regulator but in vain.

I disassembled the gun and found that regulator is working fine.

Checked that valve pin is not seizing in the hole.

Cleaned the gun and adjusted the valve return spring at a higher pressure.

Lubed the necessary areas and reassembled it.

Now the behaviour is a bit better but then there is low or high fps by 50fps. The spread is also not like it should be.

Now as the regulator is fine, I can just assume that there may be some rough area on hammer or in the channel in which hammer moves.

I couldn't disassemble the hammer as the screw type pin that holds the hammer inside the action is too tight and couldn't be unscrewed.

I can just assume that due to some reason the hammer strike is not consistent which results into inconsistency.

Please advise.

Regards,

Bhaur

aluminumfetish:
Sear drag ?

Navigation

[0] Message Index