Donation

All Springer/NP/PCP Air Gun Discussion General > Big Bore AirGun Gate

Umarex Hammer parts diagram?

(1/1)

Greg_E:
Anyone see a parts diagram for the Umarex Hammer floating around? I need to do some work on mine and some of the things I might need to get at seem hidden or not present, the diagram would go a long way to figuring out my next steps.

Greg_E:
Here is part of what I found during my repair, a whole lot of stuff needs to come apart if some things are stuck.

The barrel threads into a big "nut", the nut threads into the receiver. This is part of how you set the clearance between magazine and barrel. I did not take my barrel out of this nut, so I'm not sure how the barrel locks into it.

The regulator is nothing special, they just used a Ninja bottle regulator. Mine is set for 3000 psi or at least stamped 3000. I know they made a big deal about their regulator and plenum. I didn't need to dig into trigger, hammer, or valve so not sure how it really works.

Navigation

[0] Message Index