Donation

Support Equipment For PCP/HPA/CO2 and springers ,rams > 3D printing and files

Extended Notos muffler inserts

<< < (2/5) > >>

miksatx:

--- Quote from: subscriber on May 26, 2023, 01:45:38 PM ---Wow, Mike; thanks for your swift work

I hope your result encourages more people to try it.

Oh, by the way, what pellet weight and velocity were those sound values captured at?

--- End quote ---
Crosman hp 14.3 825fps bout 20fpe.

subscriber:
Thanks, Mike.  That is 21.6 FPE

subscriber:
I realized yesterday, that despite the Notos being rated at 13 FPE on the PA site, it shoots at 19 or 20 FPE as set from the factory.  So, the guys that are now able to hear their hammer strike with my extended insert design installed, are actually shooting at 19 to 20 FPE (confirmed).

This means my statement about "intended for 12 FPE" is incorrect, because clearly it works at almost double that...

bruce.net:
Thanks for all your work on these. Notos came in Wednesday, hand pump Thursday, printed Friday. I only had PLA which held up great for the 30 shots or so I tested it. Between the print and turning down the hammer spring results in LOUD targets and a quiet Notos.  Reprinting now with some fresh PTEG.

Bambu Lab prints it 4 walls / 100% infill in just over 2.5 hours. 

subscriber:
Thanks, Bruce

Never heard of Bamboo labs before. 2.5 hours seems very fast.  Link for interested parties:  https://bambulab.com/en/p1

Navigation

[0] Message Index

[#] Next page

[*] Previous page