Donation

All Springer/NP/PCP Air Gun Discussion General > Machine Shop Talk & AG Parts Machining

5C Collet Rant

<< < (3/4) > >>

Ronno6:
I recently purchased the Hardinge....it uses 5C........

OTmachine:
Not what I was referring to.  JACOBS Model 91-A6 Rubber Flex Lathe Collet Chuck A1-6

OTmachine:
 Collets

Ronno6:
Gotcha...thanks!

pan60:
collect are size specific you use the collect that fits. as mentioned if you dont have the size you need and cant find it just make with with an emergency collect very standard.
you can also go to something diferant or use a chuck as mention but i would just use the 5c they work they are cheap enough very coman and they work :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page