Donation

All Springer/NP/PCP Air Gun Discussion General > PCP/CO2/HPA Air Gun Gates "The Darkside"

Beeman 1358 Regulator

(1/3) > >>

Robert 5mm:
Does anyone know if the Lane Regulators for other Beeman PCP's fit the 1358

https://laneregulators.com/beeman

starlingassassin:
i hope you find an answer,i am wondering the same thing.

Robert 5mm:
Email reply from Lane:

The answer is a little tricky as in YES YES & Um No.

I have quite a range or regulators for Beeman rifles, however like with Brocock & Webley I have to ask you the customer to do some checks.

I have regulators to fit 3/4" / 22mm / 25.20mm / 28.35mm & 30.00mm Internal Diameter Reservoir Tubes, however I have had customers with 3 different size tubes on guns with the same name :-( !!!!!! so as you can image this has caused some issues and so I don't go out my way to promote them.

If you know the I.D. and what the Outlet Valve fixing is like then YES, I have a regulator to suit, if you don't know I wouldn't want to risk sending the wrong item out.

To measure I.D.


Robert Lane

jjohnsonlta:
I have seen on Lane's sight they can custom build a regulator to fit many guns. If you go through and search several old posts on the 1358/1357 you will probably find what you need to know. One person did a regulator but had to have a part machined to get it to work since it was for another gun. The tube dimension I saw also in a post. I think from kerndtc on here.

Jim Stephens:
in answer to a reg for the beman  series ,1357 / 1358/1359, yes they do. lance regs MK 9 lancet from lane regs. does . they have to know the ID of the air chamber to make sure that they send you the rite one. Note the air chamber for the Chief, Chef 2 ,and 1357,8,& 9 are all the same , i checked with Peter at  Beman to make sure. they cost about 105 dollars plus tax mabe some shipping not sure ,but they are available.happy shooting.  Jim

Navigation

[0] Message Index

[#] Next page