Author Topic: Nova Freedom/Seneca Aspen bottle adapter (Read 3599 times))

Cajunhoss87 · « **on:** May 08, 2022, 12:09:22 AM »

Looking for the threads to the below adapter on my Nova Freedom so I can have a bottle adapter made. My check valve seal went bad and my rifle won't pump. I'm ready to bottle it but I can't find a decent priced adapter anywhere. Can anyone make one for me? Don't care about a plenum yet but it seems that the existing burst disc could be a great place for a screw in plenum instead of the small pinned tube above the pump. Thinking I'll just shorten the small reservoir and plug and play. I drew out my best guess.

Madd Hatter · « **Reply #1 on:** May 08, 2022, 02:04:30 PM »

Had the same thing happen to my Aspen. To bad Duy isn't taking orders right now.

Cajunhoss87 · « **Reply #2 on:** November 26, 2022, 03:45:56 PM »

Do you know anyone who happens to be making just the M16x1.0 asa adapter?

SILENT SQUIRREL · « **Reply #3 on:** November 26, 2022, 05:10:18 PM »

Quote from: Cajunhoss87 on November 26, 2022, 03:45:56 PM

Do you know anyone who happens to be making just the M16x1.0 asa adapter?

Have you tried Best Fittings (K) or Joe Brancato Air Tanks for Sale
https://www.bestfittings.co.uk/
http://www.airtanksforsale.com/

Hopefully a member with the ability to make one for you will chime in.

If that happens, please share the contact info.
I need an adapter
Male M20.5 x 1 to Male M18x1. 5

Good luck
Ed

Cajunhoss87 · « **Reply #4 on:** September 05, 2023, 11:31:55 PM »

Can anyone confirm the threads foing itno the receiver on the Seneca Aspen/ Nova Freedom input adapter?

2K1TJ · « **Reply #5 on:** October 24, 2023, 08:54:07 AM »

I'm looking for this too. Did you ever find out?

Cajunhoss87 · « **Reply #6 on:** October 24, 2023, 10:33:05 PM »

No haven't found out anything. It's really frustrating that the there is an adapter for the Nova Liberty/ Avenger but not for the Freedom/ Aspen that could benefit the most from it.

Best I can tell is to have a machine shop make a custom one off.

Rob M · « **Reply #7 on:** October 25, 2023, 09:48:44 AM »

Justin ,
I can make the adapter, making it from scratch might be pricey , but what about i make the adapter to asa from the stock part by simply adding a hex ASA on the right side . like this

send me the factory adapter, ill do it to my OWN spec and test the seal to 4000 and send it back. If you want a completely original part, I dont have time for that and it would cost as much as the gun. Anyway , just giving you an option to reliably mount tanks to the gun.. If not interrested , no biggie , just throwing it out there because its pretty straight forward.

2K1TJ · « **Reply #8 on:** October 25, 2023, 11:39:39 AM »

I'd buy one too Rob, if you're willing to do more than one. Thought it may make it a little more worth your trouble, instead of setting up for just one part.

SILENT SQUIRREL · « **Reply #9 on:** October 25, 2023, 12:08:41 PM »

Quote from: 2K1TJ on October 25, 2023, 11:39:39 AM

I'd buy one too Rob, if you're willing to do more than one. Thought it may make it a little more worth your trouble, instead of setting up for just one part.

And another buyer here as well, Rob

Edward

Rob M · « **Reply #10 on:** October 25, 2023, 01:13:06 PM »

well id be taking the factory part and adding the asa. So thered be no going back. Yes, I could make the connector part( left side ) from scratch ,. but that doubles the labor and price. If you want the adapter done , send me a PM , ill send my address , turnaround time will be less than 24 hrs.Make sure youre return address is legible , and add your user name to the envelope in case i need to reach you on here.

Rob M · « **Reply #11 on:** October 25, 2023, 06:50:35 PM »

another option is adding the asa to the end of the adapter ( right side ) and this way it would be reversible. downside is the tank would sit further out

2K1TJ · « **Reply #12 on:** October 25, 2023, 07:38:38 PM »

I'd prefer to keep mine as short as possible. I'm planning on a 220cc CF bottle and shortening the barrel a little.

Rob M · « **Reply #13 on:** October 25, 2023, 07:58:16 PM »

yea, that 1 inch section out front will serve no purpose.( other than reverting back to the pump system in the future

2K1TJ · « **Reply #14 on:** October 25, 2023, 08:08:32 PM »

Gotcha.

For anybody following along, please don't copt the guy in the video. He says he used regular hardware store stuff, I think he said Home Depot 😨

SILENT SQUIRREL · « **Reply #15 on:** October 25, 2023, 08:35:40 PM »

Quote from: Rob M on October 25, 2023, 07:58:16 PM

yea, that 1 inch section out front will serve no purpose.( other than reverting back to the pump system in the future

Rob M
I remain interested, but a little confused.
PM on the way

Rob M · « **Reply #16 on:** October 25, 2023, 08:50:10 PM »

ok,, to clarify something
You would be sending your adapter as pictured above in post" reply 4 " by justin,
Id then take that part, part off the useless side ( right side ) and add the hex asa adapter by drilling and threading the part. Id seal it , and send it back to you ready to install. hope that clarifies any confusion. The cost will be relatively low with the information I have soo far
One more thing worth noting , youd need a regulated tank to use the proposed adapter, unlike the home depot solution up top.

dan_house · « **Reply #17 on:** October 26, 2023, 02:16:06 PM »

"Id then take that part, part off the useless side ( right side ) and add the hex asa adapter by drilling and threading the part"

sooooo cutting off that 1 inch, rethreading it for the ASA adapter and reinstalling it lets me use a reg'd bottle?

oh man yer killing me.... PM inbound

buddyb · « **Reply #18 on:** October 27, 2023, 03:35:37 PM »

Check with Wayne at Alien Airguns and bargains. https://www.ebay.com/str/alienairgunsandbargains He's also on Facebook.

Tack Driver 10 · « **Reply #19 on:** October 31, 2023, 04:17:57 PM »

Palmers can make you one or buy the adapter and thread the 16mm end.
Call for a quote.

https://palmerspursuit.com/products/copy-of-825x14-female-paintball-asa-blank-1-diameter-ready-to-mod-or-customize