Donation

All Springer/NP/PCP Air Gun Discussion General > Wood Chop Shop (Working with wood)

Air Venturi Avenger wood stock build ?

(1/3) > >>

buddyb:

I want to make a thumb-hole stock for the avenger.

What size router bit and type is used for the in-letting process?

Thoughts on gluing cabinet plywood together for the stock?

Gbeezy:
Measure your air tube and find a core box router bit that matches as closely as possible.  You may have to finish it off with a piece of dowel rod wrapped in sandpaper.  You will probably also need a small assortment of straight cut bits for the receiver and trigger inletting.  Use baltic birch if you use plywood, it is knot and void free in the inner layers.

buddyb:
Thanks Greg that helps.

Gbeezy:
Here's a few pics of a stock I made for a friend's double tube disco.

buddyb:
nice stock, how hard was it to do the inletting?

Is that hickory?

Navigation

[0] Message Index

[#] Next page