Donation

All Springer/NP/PCP Air Gun Discussion General > Air Gun Review Gate

Edgun Leshiy 2 R.E.P.R. DESIGN FLAWS & MAJOR PROBLEMS

<< < (4/4)

MikeCarter:

--- Quote from: pan60 on December 10, 2022, 07:19:29 PM ---very helpfull!
not familure withe Airgun Geeks podcast but i will do a search for it.
thanks pan

--- End quote ---

Yeah check them out they’re very fun and informative to listen to

sb327:
The trigger is just different than what most expect. I use the very tip of my finger and slow squeeze. The ‘springiness’ of my finger reacts to the drop in pressure holding the ball closed and this creates a follow through type pull. Works fine for me.

A fantastic gun for sure and built like a tank.

Although I will not say it is a bench gun, it doesn’t do too bad from a bench. Quite accurate.

Dave

jakeadks:
Figured I’d update here after putting a year in with the ol’ L2
All in all I love the gun. I don’t choose to use it when it’s very cold which clears up the ice issue. I put some tape over the vents that blew air at my face. Not elegant, but effective, and it still cycles fine. I polished the face of the barrel that meets with the magazine gently with a knife strop. I very rarely have cycling issues. It seems like there was an extended break-in because these days the thing shoots lights-out accurate with CPHP 850-950fps, JSB 18s 860-900fps, and also NSA 20.2s in the .2195 diameter up over 915fps. The SD is a little higher than I’d like but that’s not a huge issue. The NSA will stay around an inch at 60 yards which blows me away considering the size and action of the gun. Incredible power for the barrel length too. Gun took some learning but is a keeper. Highly recommend adding the bottle, especially if you’re pushing slugs.

Navigation

[0] Message Index

[*] Previous page