Author Topic: Identifying Pipe Threads (Read 6750 times))

rsterne · « **on:** June 02, 2020, 02:37:46 PM »

Here is an excellent link for identifying pipe threads....

https://trimantec.com/blogs/t/thread-identification-guide

The common ones we see are 1/8"-27 NPT, 1/8"-28 BSPP, and M10 x 1 mm Metric Pipe threads.... Most are available in straight (requires a sealing washer or O-ring) or tapered (seals on the threads, using Teflon tape)....

Bob

Tonykarter · « **Reply #1 on:** June 02, 2020, 02:46:17 PM »

EXCELLENT find! Thanks Bob. Can this be stickied? I see a time in the future when I will need it and not be able to find it.

rsterne · « **Reply #2 on:** June 02, 2020, 03:06:26 PM »

It already is!....

Bob

bnowlin · « **Reply #3 on:** June 02, 2020, 10:12:34 PM »

Thanks Bob, that very helpful.
Bob

OTmachine · « **Reply #4 on:** August 17, 2024, 01:03:50 PM »

Might want to add this 1980’s Aeroquip Pub

Thank you to our advertisers!

Identifying Pipe Threads

Author Topic: Identifying Pipe Threads (Read 6750 times))

rsterne

Identifying Pipe Threads

Tonykarter

Re: Identifying Pipe Threads

rsterne

Re: Identifying Pipe Threads

bnowlin

Re: Identifying Pipe Threads

OTmachine

Re: Identifying Pipe Threads