|
Request A Quote for Volume Prices, Non-Standard Sizes,
Materials, Durometers, Colors..... |
|
Materials |
|
General Properties |
|
Common Applications |
Buna-N
(Nitrile / NBR)
70 Durometer Black |
|
Good resistance to
petroleum, hydrocarbons, fuels.
Widely used with most oils, hydraulic fluids, alcohol.
Poor resistance to sunlight, weathering and ozone.
Many compound variations for specific applications.
The least expensive most readily available material.
Basic temperature range: -40 F to +250 F* |
|
Petroleum Oil
Seals
Hydraulic Fluid Seals
Water/Greases
Transmission Fluid Seals |
|
Viton®
(Fluorocarbon)
75 Durometer Black |
|
Excellent temperature and chemical
resistance.
Excellent mechanical and physical properties.
Low compression set and low gas permeability.
Not for use with Acetone, Skydrol, or ethyl Acetate.
Basic temperature range: -20 F to +400 F* |
|
Vacuum Seals
Many Acids and Fuels Heat Resistance
Many Chemicals
Many Solvents |
|
Silicone
70 Durometer Red/Orange |
|
Broad temperature range. Odorless /
non-toxic.
Resistance to sun and ozone. Fungus resistance.
Poor tear and abrasion strength.
Poor resistance to oils.
Basic temperature range: -80 F to +400 F* |
|
Dry heat
Alcohol / Oxygen
Electrical / Medical
Low Temperature |
|
EPDM/EPR
(Ethylene Propylene)
70 Durometer Black
|
|
Resistance to sunlight, weathering
and ozone.
Poor resistance to petroleum oils and fuel.
Good heat and compression set resistance.
Basic temperature range: -65 F to +250 F* |
|
Steam/Hot water
Hydraulic / Skydrol
Some Chemicals
Auto Brake Systems
Alcohol / Greases
|
|
Viton® ETP
(Viton® Extreme) |
|
Superior chemical resistance vs.
standard Viton®.
Other properties similar to standard Viton®.
For use between standard Viton® and Kalrez®
Basic temperature range: -5 F to +400 F* |
|
Chemical Resistance
For use between standard Viton®
and Kalrez® |
|
Chemraz®
Simriz®
Kalrez®
(Perfluoroelastomer) |
|
High temperature and chemical
resistance.
Excellent resistance to chemicals.
Excellent outgassing performance in vacuums.
Low compression set.
Various compounds for specific applications.
Basic temperature range: -10 F to +600 F*
Simriz® = performance and savings. |
|
Click for Specific Compound Info:
Chemraz®
Simriz®
Kalrez® |
|
Encapsulated
FEP or PFA |
|
Common core materials:
Silicone, Viton, SS Spring
Chemical resistance of FEP/PFA with compression set resistant
core.
Basic temperature range: Depends on core material. |
|
Chemical resistance of FEP/PFA with compression set resistant
core. |
|
| PTFE® |
|
Excellent temperature range.
Various chemical and fuel resistance.
Low coefficient of friction.
Non-elastic.
Basic temperature range: -250 F to +450 F* |
|
Temperature Range
Chemicals / Fuels
Non-elastic |
|
Neoprene
(Chloroprene) |
|
Good resistance to petroleum oils.
Low compression set and good abrasion strength..
Good resistance to weathering, sunlight and ozone.
Basic temperature range: -40 F to +225 F* |
|
Refrigeration Seals
Freon / Air Conditioning
Motor Mounts
Engine Coolants |
|
|
Fluorosilicone |
|
Wide range of fluid and chemical
resistance.
Large temperature range.
A blend of Viton® and Silicone.
Basic temperature range: -80 F to +350 F* |
|
Aircraft fuel systems
Jet Fuel / Gasoline
Petroleum Oils
Synthetic Jet Oil |
|
Urethane
(polyurethane)
|
|
Available in High and Low Grades
Excellent wear/abrasion and extrusion resistance.
Poor compression set and chemical resistance.
Basic temperature range: -65 F to +225 F* |
|
High Pressure Hydraulics
Drive Belts
|
|
Accessories
Click bellow to Order |
|
O-Ring Kits,
Splicing Kits,
Sizing Cones,
Parker O-Lube,
Installation/Extraction Tools,
and the ORID(O-Ring
Material Identifier |
|
Accessories
Click on the links for details |
| |
|
Aegis® is a
registered trademark of Freudenburg-NOK
Kalrez® and Viton® are registered trademarks of DuPont Dow
Elastomers.
Chemraz® is a registered trademark of Green Tweed.
http://www.allorings.com |
