Quote from: Gear_Junkie on June 07, 2015, 06:58:45 PMI'm pretty sure that center circle in this picture (looking into the end of the shroud) is the barrel - right???Who knows, I can't really tell from that pic but could be. I'll get mine later this week and will check it out for sure.
I'm pretty sure that center circle in this picture (looking into the end of the shroud) is the barrel - right???
Real quality. Rushed to market? Makes you wonder how throughly tested the rifle was. Small problem,simple fix but does it for shadow things to come. Cancelled my order.
First part to 'fall off'! Cocking level has a simple push pin that is a little small!!
Quote from: rcmark on June 09, 2015, 01:18:45 PMFirst part to 'fall off'! Cocking level has a simple push pin that is a little small!! I would still contact FX and let them know about this. They might send you a new [better] pin, and it would give them some valuable feedback so they could correct any issues.Sorry about the problem - that's a bummer. I hate it when I get all excited for a new gun, and it ends up having issues.
Quote from: Gear_Junkie on June 10, 2015, 12:17:09 AMQuote from: rcmark on June 09, 2015, 01:18:45 PMFirst part to 'fall off'! Cocking level has a simple push pin that is a little small!! I would still contact FX and let them know about this. They might send you a new [better] pin, and it would give them some valuable feedback so they could correct any issues.Sorry about the problem - that's a bummer. I hate it when I get all excited for a new gun, and it ends up having issues.In the past I have tried to contact FX by email. I have NEVER received a response!
Quote from: rcmark on June 10, 2015, 12:37:23 AMQuote from: Gear_Junkie on June 10, 2015, 12:17:09 AMQuote from: rcmark on June 09, 2015, 01:18:45 PMFirst part to 'fall off'! Cocking level has a simple push pin that is a little small!! I would still contact FX and let them know about this. They might send you a new [better] pin, and it would give them some valuable feedback so they could correct any issues.Sorry about the problem - that's a bummer. I hate it when I get all excited for a new gun, and it ends up having issues.In the past I have tried to contact FX by email. I have NEVER received a response!Hmmm, that's not good. I've tried to contact them a couple times over the past few weeks, too. They never responded to me either. Maybe I'll forget about this gun [and FX in general] - customer support is important, when you need it. I don't know...
Quote from: Gear_Junkie on June 10, 2015, 12:52:50 AMQuote from: rcmark on June 10, 2015, 12:37:23 AMQuote from: Gear_Junkie on June 10, 2015, 12:17:09 AMQuote from: rcmark on June 09, 2015, 01:18:45 PMFirst part to 'fall off'! Cocking level has a simple push pin that is a little small!! I would still contact FX and let them know about this. They might send you a new [better] pin, and it would give them some valuable feedback so they could correct any issues.Sorry about the problem - that's a bummer. I hate it when I get all excited for a new gun, and it ends up having issues.In the past I have tried to contact FX by email. I have NEVER received a response!Hmmm, that's not good. I've tried to contact them a couple times over the past few weeks, too. They never responded to me either. Maybe I'll forget about this gun [and FX in general] - customer support is important, when you need it. I don't know...I also sent a Email to AOA with the pictures of the trigger adjustment screws asking what the 4 screws do. NO RESPONSE !!!
Looking to adjust the trigger.Looks like we have 4 adjustable set screws.Anyone have any ideas of what the do?I adjusted the one second from the right in about a quarter of a turn in and it seemed to increase the resistance of the second stage.
With all the time everyone has been waiting for this gun, why could no one find the time to write up a manual for it?
Quote from: rcmark on June 10, 2015, 12:58:08 AMQuote from: Gear_Junkie on June 10, 2015, 12:52:50 AMQuote from: rcmark on June 10, 2015, 12:37:23 AMQuote from: Gear_Junkie on June 10, 2015, 12:17:09 AMQuote from: rcmark on June 09, 2015, 01:18:45 PMFirst part to 'fall off'! Cocking level has a simple push pin that is a little small!! I would still contact FX and let them know about this. They might send you a new [better] pin, and it would give them some valuable feedback so they could correct any issues.Sorry about the problem - that's a bummer. I hate it when I get all excited for a new gun, and it ends up having issues.In the past I have tried to contact FX by email. I have NEVER received a response!Hmmm, that's not good. I've tried to contact them a couple times over the past few weeks, too. They never responded to me either. Maybe I'll forget about this gun [and FX in general] - customer support is important, when you need it. I don't know...I also sent a Email to AOA with the pictures of the trigger adjustment screws asking what the 4 screws do. NO RESPONSE !!!They may not know, since FX has no specific manual available for this gun. They still don't have specs for this gun listed on their web page - only an announcement??? Hopefully AoA DOES know and gets back to you soon.Good luck!
A little JB Weld and it's all good!!I have over 1000 pellets thru this gun, If anything else was 'going to go bad' I probably would have seen it by now!
Quote from: rcmark on June 09, 2015, 04:48:46 PMA little JB Weld and it's all good!!I have over 1000 pellets thru this gun, If anything else was 'going to go bad' I probably would have seen it by now!Bummer about the pin. It looks like you got that sorted which is good to see. So far am happy to say that I have yet to encounter any significant problems with the Wildcat (aside from the lack of manual). In fact, the Wildcat (knock on wood) is the very first PCP I have owned that actually doesn't have any issues or problems right out of the box. There are some things that could be better on the Wildcat which I will elaborate on later. In the meanwhile, here is the list:Muzzle cap keeps working it's way loseMagazine ho-humCleaning barrel a pain (I think I found a solution)Oh and I removed the barrel. I'll post pics later as I know there were questions about the width of the barrel walls, etc. Standby..Scott