I'm in the middle of turning my 1322 into a 2260/disco carbine. The plan is to use a 2260 PCP tube, a disco adapter assembly, disco valve assembly, disco hammer spring, disco striker, PPh #8x.188 screw and a carbine stock and forearm. What i was wondering is can i use the long steel breech, bolt, hammer pin, tube plug, sleeve and breech gasket from my 1322. I checked the part numbers and the hammer pin, sleeve and breech gasket are the same so I'm guessing that's good to go. So my main question is about the steel breach and tube plug also any other suggestions/advice you have is appreciated! Thanks in advance, James.