Pappywith4, I have both the 125 and 135 hatsans. You can order from hatsan the 135 wood stock for $79.99 as the 125 action will fit it. I plan on buying one when my 125 stock finally goes. It currently has cracks on both sides by the SAS bolt holes. I have repaired these using epoxy but its only a mater of time before I have to get a new stock. Good luck to you.
Pappy, Hope you got your 125 back in it's stock. I have the Hatsan model 1000S and it like torqued its self after I took it in and out a few times.To the point where the rear main bolt sleeve wouldn't match back up with the stock hole. So, I carefully removed some stock material using a round file. Just enough to allow it to fit.My brother lives at Rusk. Lots of fox and cat squirrels live in your area. Good hunting. OM
When I have one do that I have a pin light I hold in my teeth so my hands are free and I can see in the hole and push up or down on that side of the stock or leave the back screw loose and pull or push on the barrel to get it lined up with the hole and start the screw. But leave them all loose till they're started then tighten them.