Nice job on the video. I have watched Baxter's vids on the regulators which are very informative, keep us up to date on your progress.
Look like you have too much spring tension. I get a 5 fps spread over 40 shots with the HUMA reg and AT44 long 22 cal. I have my preload set to zero.
Quote from: blackdiesel on June 24, 2015, 11:32:18 PMLook like you have too much spring tension. I get a 5 fps spread over 40 shots with the HUMA reg and AT44 long 22 cal. I have my preload set to zero.A 5 fps spread is excellent. So your hammer spring is turned completely clockwise?
Yes you have to tune to spring to the reg, start all the way in, the less tension possible. Then slowly go from there.
Quote from: HunterOne on June 24, 2015, 11:40:11 PMQuote from: blackdiesel on June 24, 2015, 11:32:18 PMLook like you have too much spring tension. I get a 5 fps spread over 40 shots with the HUMA reg and AT44 long 22 cal. I have my preload set to zero.A 5 fps spread is excellent. So your hammer spring is turned completely clockwise?Yes. The gun was shooting too hot before I got the reg. I have the reg set at 110 bar. I had it set at 130 bar first but I was still too hot. I wanted to shoot the 18.13 gr JSB pellets because they shot good and because of the cost.
Too bad we don't have ground squirrels around here to see how much of a hammer And speaking of hammers, I'm stoked about the BT65 30 cal. It's getting tuned but out of the box I was hitting bottle caps at 85 yards consistently. The people familiar with me going to think I'm Blaspheming but it may just take over as my favorite long range shooter from the 25 cal Sumatra-Man that was hard to say LOL