GTA

All Springer/NP/PCP Air Gun Discussion General => American/U.S. Air Gun Gates => Crosman-Benjamin Air Gun Gate => Topic started by: mchlquick on November 08, 2013, 06:33:07 PM

Title: what parts fit the 2240 pistol ???
Post by: mchlquick on November 08, 2013, 06:33:07 PM
will the receiver and barrel from the 2300S fit on to the 2240.  I called Crosman and did not get much information.  Would like to know what parts from other models of crosman pistols will fit the 2240.
Title: Re: what parts fit the 2240 pistol ???
Post by: RatRacer on November 08, 2013, 08:12:14 PM
Yes.
A 2300 is a 2240 with a steel breech. A 2400 is a 2250b, so pretty much all 22XX parts interchange. Some parts even interchange with 1377  and Discovery, so research or ask away.
Title: Re: what parts fit the 2240 pistol ???
Post by: silent_airman on November 08, 2013, 08:37:02 PM
You can even use the grip assembly from a Marauder pistol, also known as a PRod. You just have to change out the stock hammer for the Challenger hammer, or mod the stock hammer. The 2240 has nearly endless versatility. I built a 2250b from parts from a 2240 and some I ordered from Crosman.