Yes, peaking at 918 with the 95 grain. Actually had one more shot in that string at 856 last shot. Anything above 2700 and I get more progressive valve lock. I shot 110 grain from 3000 psi and had nine shots before I hit 800 fps. Recommended fill is 2650- 2800, with 3050 being the maximum fill. To move my power further up into higher fill pressure ill need a stronger spring. It shoots jsb 81 grain on a nice curve for 18 shots, but heavier than that really needs more spring tension.
Thanks guys! I've got some new stuff coming next week to try out. About 100 grain
I bought Prouzy's (Chris) .357...just got it in yesterday....cant wait to shoot it!!!
Quote from: oneshot61 on February 18, 2016, 07:50:35 PMThanks guys! I've got some new stuff coming next week to try out. About 100 grain Short BBTs, that's interesting. Do post the accuracy results, they should cast around 109 grains unless you have the HP version.
Quote from: msurf on February 19, 2016, 01:23:13 AM I bought Prouzy's (Chris) .357...just got it in yesterday....cant wait to shoot it!!!Chris is a great guy, and has been very helpful. You will love this gun no doubt. I think his (yours) has the power wheel. It says 9mm on it but when I switched to .357 Ammo, I got better speed and accuracy. Congratulations!!
Quote from: oneshot61 on February 19, 2016, 08:29:27 AMQuote from: msurf on February 19, 2016, 01:23:13 AM I bought Prouzy's (Chris) .357...just got it in yesterday....cant wait to shoot it!!!Chris is a great guy, and has been very helpful. You will love this gun no doubt. I think his (yours) has the power wheel. It says 9mm on it but when I switched to .357 Ammo, I got better speed and accuracy. Congratulations!! Thanks! Yes Chris is a standup guy for sure. He sent me a bunch of ammo to try too! Yes, it is the model with the power wheel.He also indicated the barrel may work with a .358,, so I bought a 110 grain mold and cast a few hundred. They measure out at .3575..at least the good ones do. The barrel slugged out at .3580 lands and .3545 on the grooves. Will slug several more times to get an average. BTW, do you have serial #s on yours? Cant find any on mine..
It's just been sitting in the rack, I'm concerned about taking it apart without an exploded drawing at least. It may be critical just how tight the air tube with the barrel through it should be tightened. So I'm letting some other brave soul dive into it first or find some info. Regards, Tom