when i need to rebuild my old 2100 im going to these mods someone did on a 2200if they work for the 2200 they will work for a 2100 http://www.network54.com/Realm/CFTech/FB2200.htm
Quote from: 1377x on June 27, 2012, 09:20:03 PMwhen i need to rebuild my old 2100 im going to these mods someone did on a 2200if they work for the 2200 they will work for a 2100 http://www.network54.com/Realm/CFTech/FB2200.htmThanks. I read it over real well. But I found it to be vague on details of how to. Perhaps you can shed some light? For example, he never says how to get that little transfer port seal in and out? And that bit about cutting the breech in half. That could not have been more vague. He first shows cementing the barrel into the breech, and then he shows the barrel on the grinder with the breech missing? So I found it impossible to follow along. Perhaps you or someone else could translate in more detail??Mine too leaks air. I can feel the puff of air come through the bb slot during the shot cycle, and that's after I worked on it a little. I would be willing to put in the work, but I need some better direction. Can you help?Thanks.