GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => German AirGun Gate => Topic started by: rotaidalg on June 30, 2011, 09:42:01 PM
-
I own a Model 45 manufactured in 1988. I broke the bottom sear piece back in 2005 (after about 10 years of procrastinating ordering a new Main Spring!). I'd just returned from Iraq and had some money to order a new spring for this rifle. Unfortunately I had no Clamps, compressors, etc. and while re-assembling the receiver with the new spring I managed to break the tip off the lower sear piece... :(
Back then RWS Diana still had an office in New Jersey. Well, 10 more years of procrastination - I'm just back from Afghanistan & now I'm afraid the parts are unavailable! (Thanks, Glenn Seiter from UmarexUSA, for researching this for me.)
If I can get it to post I'll insert a picture of the part glued back together (for photo purposes only) to see if ANYONE might have one of these about!?! Thanks!(http://)
-
Welcome to the GTA ! Out of stock at the moment but I believe SR062 is the part you are looking for.
http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24388&cat=45 (http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24388&cat=45)
Dustin
-
yep TW Chambers ought to be able to help you out if not their are others who may! look and see what they have. :P
-
you can always have it welded too! :P
-
Thanks, guys. I thought about the welding idea but the metal looks like a pressed/sintered piece(?) & I didn't know if it were possible/advisable - I'd hate to have such a critical portion of the mechanism subject to sudden failure!! {:(
-
Oh, good to have GTA back up & running!
-
Contact J&G airguns they make parts for airguns they maybe able to help you out! :P