Hi TimmyMac1, I have a stock 392 in shipment and just ordered some of your special sauce. Do you have a graphic somewhere illustrating the lube points on the 392 for the special sauce?
Quote from: agorena123 on October 21, 2017, 07:03:59 PMHi TimmyMac1, I have a stock 392 in shipment and just ordered some of your special sauce. Do you have a graphic somewhere illustrating the lube points on the 392 for the special sauce?Lube points are the lever pivots. One is in the front plug, one is at the pump link to lever arm rivet and the third is at the guide end of the piston assembly where the pump link hooks up to the Piston. I call that the GUIDE END of the piston. This part is made like a metal sponge and will soak a lot of oil up. If it doesn't show signs of WET when you open the lever and look at it add some there and some on the other pivots. Be generous on the guide end. It feeds oil to the valve constantly so the debris and condensation from pumping is able to be fired out with the pellet when you shoot.A properly lubed pump gun will not wear out and will keep itself clean internally.TimmyMac1