Yeah kinda what Im looking at. I need to figure out what adapter people are using and it would be nice to still be able to have an adustable valve back there some how.Can anyoe point me ina direction for some good wooden grips. Looking for a drak wood that will look good with brass. I hear of the super pumpers by RBGrips but his site is down.Thanks.I refuse to be talked into the 880. This is going to work.
ok, yes, all the mods work with the older 1377s. however, I don't think the stock will work with the phase I - those had a different frame and different grips. also, the stock fits my phase II but not perfectly. I had to add some layers of electrical tape to one section of it to keep the stock from rocking back and forth. fits great now. I found out about the tape mod from a you tube video and it works and is free. I don't think adding a magnet to a bolt probe would hurt anything. as long as it didn't add too much length to the probe, so that when you open the bolt, there is still enough room in the breech to load a bb or pellet. won't need much room to load a bb though. I think my 1986 phase II was rated at 630fps with bbs and 570 with pellets. If I get ambitious, I could dig up the manual.