good info for people unfamiliar with this trigger group. i'm suprised more aren't using it. to add to what you've put here. if the trigger doesn't go light enough , one can give alittle stretch to the spring attatched to the adjuster and link. just alittle bit though.question, is polishing even possible on sinctered metal like these trigger parts. i've just cleaned them up like you suggested, and they're great, but just wonder about that metal. same type metal in the m-rod trigger groups.peacekj
Quote from: kj on April 14, 2017, 01:37:32 AMgood info for people unfamiliar with this trigger group. i'm suprised more aren't using it. to add to what you've put here. if the trigger doesn't go light enough , one can give alittle stretch to the spring attatched to the adjuster and link. just alittle bit though.question, is polishing even possible on sinctered metal like these trigger parts. i've just cleaned them up like you suggested, and they're great, but just wonder about that metal. same type metal in the m-rod trigger groups.peacekjCeramic stones clean em up very nicely
Be advised with the cover off you will need three hands and an extra safety ball. Dave
I have lost a couple of those safety balls myself. It finally occurred to me that it was the pressure on the safety bar that was pushing up and launching the ball. Now, I place the stock or handle under the grip frame to keep it up and no pressure on the safety. I haven't had one come flying out since. Or, you could remove the grip frame like Wyo shows in his post. That's probably the best way.
Quote from: DLimer on April 17, 2017, 12:19:34 PMI have lost a couple of those safety balls myself. It finally occurred to me that it was the pressure on the safety bar that was pushing up and launching the ball. Now, I place the stock or handle under the grip frame to keep it up and no pressure on the safety. I haven't had one come flying out since. Or, you could remove the grip frame like Wyo shows in his post. That's probably the best way.I've lost so many that I usually find one when I'm looking for something else.. Some Vaseline on the works will limit how far they 'escape'.Wyo
Buy a bag of 100 the next time you order from McMaster Carr